This paper presents experimental results on some physical and mechanical properties of concrete containing sawdust. Concrete specimens having various cement to sawdust ratios of 1:1, 1:2 and 1:3 by volume were made and tested for workability, density, water absorption, strength and modulus of elasticity at different curing periods of 7, 14 and 28 days. It has been found that with the increase in the amount of sawdust, the workability and density of concrete decreased; the water absorption capacity of concrete, however, increased with the increase in volume. Although the strength of sawdust concrete increased with curing period, the strength and the corresponding modulus of elasticity decreased with the increasing amount of sawdust in the mi...
Wood waste has been used in concrete in 19th century. Its light-weight and cost effectiveness are ma...
Abstract In this paper, the effectiveness of the strengthening by a wooden plate for reinforced conc...
The concrete mix ratio of 1:2:4. was prepared using water/cement of 0.65 with 0%, 25%, 50%, 75% and...
This paper presents experimental results on some physical and mechanical properties of concrete cont...
Increase in prices of raw materials for the construction industry resulted in the use of recycled ma...
Sawdust concrete is a type of lightweight concrete in which some of the mineral aggregate is replace...
Industrialization in developing countries has resulted in an increase in agricultural output and con...
The aim of this study was to shows the behavior of sawdust concrete at elevated temperature. Sawdust...
Wood yields a number of by-products and Sawdust is as useful as others. Sawdust is regarded as a was...
The rising costs of building construction in developing countries have been a source of concern to g...
According to GOST 19222-84, the dependence of the physical-mechanical characteristics of sawdust con...
This study was undertaken to investigate the properties of concrete produced by partial replacement ...
This work examined the structural properties of concrete obtained bypartially replacing cement with ...
Due to increasing cost of material in the market nowadays, there is needed to search another alterna...
Most of building rubbles or wastes contain some damaged materials such as cement, brick, steel, cer...
Wood waste has been used in concrete in 19th century. Its light-weight and cost effectiveness are ma...
Abstract In this paper, the effectiveness of the strengthening by a wooden plate for reinforced conc...
The concrete mix ratio of 1:2:4. was prepared using water/cement of 0.65 with 0%, 25%, 50%, 75% and...
This paper presents experimental results on some physical and mechanical properties of concrete cont...
Increase in prices of raw materials for the construction industry resulted in the use of recycled ma...
Sawdust concrete is a type of lightweight concrete in which some of the mineral aggregate is replace...
Industrialization in developing countries has resulted in an increase in agricultural output and con...
The aim of this study was to shows the behavior of sawdust concrete at elevated temperature. Sawdust...
Wood yields a number of by-products and Sawdust is as useful as others. Sawdust is regarded as a was...
The rising costs of building construction in developing countries have been a source of concern to g...
According to GOST 19222-84, the dependence of the physical-mechanical characteristics of sawdust con...
This study was undertaken to investigate the properties of concrete produced by partial replacement ...
This work examined the structural properties of concrete obtained bypartially replacing cement with ...
Due to increasing cost of material in the market nowadays, there is needed to search another alterna...
Most of building rubbles or wastes contain some damaged materials such as cement, brick, steel, cer...
Wood waste has been used in concrete in 19th century. Its light-weight and cost effectiveness are ma...
Abstract In this paper, the effectiveness of the strengthening by a wooden plate for reinforced conc...
The concrete mix ratio of 1:2:4. was prepared using water/cement of 0.65 with 0%, 25%, 50%, 75% and...