Add to ORKGThe report summarises the characteristics of SiC powders which influence the ability to obtain fully dense (non porous) ceramics, with good mechanical properties, via the sintering process. Methods for characterising powder properties, such as particle size, morphology, bulk and surface chemistry, are outlined and specific examples are referenced. The characteristics of typical commercial SiC powders are tabulated
The effect of mechanical alloying and the sintering regime on the microstructural and the physical p...
In this bachelor's thesis literature search of preparation of advanced ceramic materi-als was made. ...
Abstract: In this paper there are presented the results of a study about some physico-mechanical cha...
The introduction of sintering aids into silicon carbide powder system is a critical step in the deve...
Different LPS-SiC were produced by pressureless sintering in argon atmosphere, starting from differ...
The report explains examinations of #alpha#-SiC powders which have been sintered either with boron a...
Silicon carbide (SiC) is an important material in industry due to its favorable mechanical, thermal,...
The micro-structural changes and mechanical properties were investigated in an Al reinforced with Si...
Materials with grain sizes down to the nanometer range have recently attracted a lot of scientific i...
The dispersion behavior of SiC powders in various concentration of mullite sol was studied by zeta p...
International audienceThe influence of spark plasma sintering (SPS) parameters (temperature, time, p...
Possibility of high performance ceramics manufactured from commercial SiC powder of technical grade ...
SiC nano-powders, produced via laser and plasma synthesis were processed to obtain fully dense and n...
The presence of pores in ceramics is directly related to the chosen forming process. So, in the star...
This master’s thesis deals with an influence of physical properties and machining technology at adju...
The effect of mechanical alloying and the sintering regime on the microstructural and the physical p...
In this bachelor's thesis literature search of preparation of advanced ceramic materi-als was made. ...
Abstract: In this paper there are presented the results of a study about some physico-mechanical cha...
The introduction of sintering aids into silicon carbide powder system is a critical step in the deve...
Different LPS-SiC were produced by pressureless sintering in argon atmosphere, starting from differ...
The report explains examinations of #alpha#-SiC powders which have been sintered either with boron a...
Silicon carbide (SiC) is an important material in industry due to its favorable mechanical, thermal,...
The micro-structural changes and mechanical properties were investigated in an Al reinforced with Si...
Materials with grain sizes down to the nanometer range have recently attracted a lot of scientific i...
The dispersion behavior of SiC powders in various concentration of mullite sol was studied by zeta p...
International audienceThe influence of spark plasma sintering (SPS) parameters (temperature, time, p...
Possibility of high performance ceramics manufactured from commercial SiC powder of technical grade ...
SiC nano-powders, produced via laser and plasma synthesis were processed to obtain fully dense and n...
The presence of pores in ceramics is directly related to the chosen forming process. So, in the star...
This master’s thesis deals with an influence of physical properties and machining technology at adju...
The effect of mechanical alloying and the sintering regime on the microstructural and the physical p...
In this bachelor's thesis literature search of preparation of advanced ceramic materi-als was made. ...
Abstract: In this paper there are presented the results of a study about some physico-mechanical cha...