Add to ORKG[[abstract]]A 30-60 GHz sub-harmonic IQ de/modulator using TSMC CMOS 0.13-mum process is presented in this paper. The IQ de/modulator consists of two FET resistive mixers, a 90deg coupler, and a Wilkinson power divider. The resistive mixer could simultaneously used as a up-converted or a down-converted mixer. Therefore, the measurement of the FET resistive mixer based modulator or demodulator will be done. The die size is 0.78 mm times 0.58 mm. Both IQ demodulator and modulator feature the conversion loss of -16plusmn1 dB and good demodulation and modulation capacity.
A 60 GHz direct carrier quadrature modulator is designed and fabricated in 0.15 μm mHEMT technology....
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...
abstract: ABSTRACT Ongoing research into wireless transceivers in the 60 GHz band is required to add...
[[abstract]]Sub-harmonic modulator and demodulator are presented in this paper using 0.13-mum standa...
Quadrature Sub-Harmonic mixing to DC or low-IF can be attractive for signal processing at Ka-band. F...
[[abstract]]In this paper, low-voltage evolution and high-speed operation mixer design are presented...
[[abstract]]In this paper, a sub-harmonic direct-conversion Gilbert-cell mixer using 0.13-frac14m CM...
Commercially available broadband microwave IQ Modulator / Demodulator modules typically cover an ins...
In recent years, the increasing amount of data transmission, the need for automotiveradars, and stan...
Abstract — This paper reports a novel MMIC balanced sub-harmonic cold FET mixer for MVDS applicatio...
This paper presents a 110–170 GHz direct conversion I/Q modulator realized in 130 nm SiGe BiCMOS tec...
For massive MIMO systems, large number of antennas and transmitter chains are considered. This huge ...
A direct carrier IQ modulator operating in the 80-95 GHz frequency range is presented. The circuit i...
This paper presents a 110-170 GHz direct conversion I/Q modulator realized in 130 nm SiGe BiCMOS tec...
We present the design and measured results for a 60 GHz double balanced sub-harmonic MMIC mixer fabr...
A 60 GHz direct carrier quadrature modulator is designed and fabricated in 0.15 μm mHEMT technology....
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...
abstract: ABSTRACT Ongoing research into wireless transceivers in the 60 GHz band is required to add...
[[abstract]]Sub-harmonic modulator and demodulator are presented in this paper using 0.13-mum standa...
Quadrature Sub-Harmonic mixing to DC or low-IF can be attractive for signal processing at Ka-band. F...
[[abstract]]In this paper, low-voltage evolution and high-speed operation mixer design are presented...
[[abstract]]In this paper, a sub-harmonic direct-conversion Gilbert-cell mixer using 0.13-frac14m CM...
Commercially available broadband microwave IQ Modulator / Demodulator modules typically cover an ins...
In recent years, the increasing amount of data transmission, the need for automotiveradars, and stan...
Abstract — This paper reports a novel MMIC balanced sub-harmonic cold FET mixer for MVDS applicatio...
This paper presents a 110–170 GHz direct conversion I/Q modulator realized in 130 nm SiGe BiCMOS tec...
For massive MIMO systems, large number of antennas and transmitter chains are considered. This huge ...
A direct carrier IQ modulator operating in the 80-95 GHz frequency range is presented. The circuit i...
This paper presents a 110-170 GHz direct conversion I/Q modulator realized in 130 nm SiGe BiCMOS tec...
We present the design and measured results for a 60 GHz double balanced sub-harmonic MMIC mixer fabr...
A 60 GHz direct carrier quadrature modulator is designed and fabricated in 0.15 μm mHEMT technology....
A sub-harmonic passive mixer for WiBro (2.3���2.4GHz) in 0.18 ��m COMS process has been designed. Th...
abstract: ABSTRACT Ongoing research into wireless transceivers in the 60 GHz band is required to add...