Noise reduction in urban LRT networks by combining track based solutions

The overall objective of the Quiet-Track project is to provide step-changing track based noise mitigation and maintenance schemes for railway rolling noise in LRT (Light Rail Transit) networks. WP 4 in particular focuses on the combination of existing track based solutions to yield a global performance of at least 6. dB(A). The validation was carried out using a track section in the network of Athens Metro Line 1 with an existing outside concrete slab track (RHEDA track) where high airborne rolling noise was observed. The procedure for the selection of mitigation measures is based on numerical simulations, combining WRNOISE and IMMI software tools for noise prediction with experimental determination of the required track and vehicle parameters (e.g., rail and wheel roughness). The availability of a detailed rolling noise calculation procedure allows for detailed designing of measures and of ranking individual measures. It achieves this by including the modelling of the wheel/rail source intensity and of the noise propagation with the ability to evaluate the effect of modifications at source level (e.g., grinding, rail dampers, wheel dampers, change in resiliency of wheels and/or rail fixation) and of modifications in the propagation path (absorption at the track base, noise barriers, screening). A relevant combination of existing solutions was selected in the function of the simulation results. Three distinct existing solutions were designed in detail aiming at a high rolling noise attenuation and not affecting the normal operation of the metro system: Action 1: implementation of sound absorbing precast elements (panel type) on the track bed, Action 2: implementation of an absorbing noise barrier with a height of 1.10-1.20. m above rail level, and Action 3: installation of rail dampers. The selected solutions were implemented on site and the global performance was measured step by step for comparison with simulations. © 2015 Elsevier B.V