Wave load prediction on a stationary bergy bit near a fixed offshore platform

Offshore oil and gas operations conducted in harsh environments such offshore Newfoundland may pose additional risks due to collision of smaller ice pieces and bergy bits with the offshore structures, including their topsides in the case of gravity based structures particularly in extreme waves. In this paper, CFD (Computational Fluid Dynamics) prediction for wave loads acting on a bergy bit around a fixed offshore platform is presented. Often the vertical column of a gravity based structure is designed against ice collisions, if operating in such an environment. In practices, topsides are usually protected by being placed sufficiently high from the still water level, away from the reach of the bergy bits. This vertical clearance between the still water level and the topside deck is known an air gap. Hence, the amount of the air gap planned for such an offshore structure is an important factor for the safety of the topsides at a given location. In this study a CFD method is applied to estimate the dynamic response of the bergy bit and provide a reliable air gap to reduce the potential risk of the bergy bit collision. In advance of more complex collision simulations using a free-floating ice for the airgap design, CFD analysis of wave load prediction on a stationary bergy bit is carried out and reported in this paper. In the experiments and CFD simulations, the location of the bergy bit is changed to quantify the change of wave load due to the hydrodynamic interaction between the bergy bit and the platform. Finally, the results of the CFD simulations are compared with the relevant experiment results to confirm the simulation performance prior to the free floating bergy bit simulations.Peer reviewed: YesNRC publication: Ye