Delignification of Sawdust White Teak (Gmelina Arborea Roxb.) by Fungi Phanerochaete Chrysosporium Irradiated Gamma Ray

Lignocellulose biomass is waste wood harvesting should be a process for separating cellulose, hemicellulose and lignin that can be utilized. This study aims to determine the effectiveness of the inoculant fungi Phanerochaete chrysosphorium gamma irradiation and chemical pretreatment to accelerate delignification powder white teak (Gmelina arborea Roxb.). In this research, pretreatment of substrate wood white teak (Gmelina arborea Roxb.) Using a solution of NaOH 1% and H2SO4 1% and gamma-ray irradiation Co-60, have the power of ionization is small, high penetrating power, and Co-60 which can emit gamma rays a short half-life time. This research was conducted in two stages, the first stage of determining the optimum dose gamma irradiation for fungi Phanerochaete chrysosphorium (0 Gy, 200 Gy, 400 Gy, 600 Gy, 800 Gy, and 1000 Gy) and the second stage of the analysis of the characteristics of the substrate wood white teak has been in pretreatment by methode Solid State Fermentation (SSF) for 21 days. The results showed that the optimum dose administration of gamma irradiation on fungi Phanerochaete chrysosphorium is a dose of 600 Gy which can increase the activity of enzymes lignin peroxidase (LiP) amounted to 22.18 U / mL. Chemical pretreatment process using H2SO4 1% biodelignification can accelerate the process of lignin degradation that produces the highest efficiency of 25.65%