Add to ORKGIn this work we investigate binary blends of polyoxymethylene and ethylene octene copolymer (EOC) and their composites with nanostructured zinc oxide (ZnO). EOC content in the composites varies from 0 to 50 wt. %. The amount of ZnO filler in the composites is changed in the interval from 0 to 5 wt. %. Thermal properties of composites are investigated with thermogravimetric analysis and differential scanning calorimetry. In general, it is observed that ZnO addition increases thermal stability of the composite
Polymer composites have established an excellent position among the technologically essential materi...
ABSTRACT: The introduction of inorganic nanomaterials into polymer matrix has resulted in polymer na...
Hydrophobic zinc oxide (ZnO) nanoparticles were produced through grafting aminopropyltriethoxysilane...
In this work we investigate binary blends of polyoxymethylene and ethylene octene copolymer (EOC) an...
Ethylene-octene copolymer (EOC) modified polypropylene (PP) and polyoxymethylene (POM) were used as ...
Ternary nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer and zinc oxide...
In the current research the effect of ZnO nanoparticles on the structure and properties of common th...
Multi-component blends of polypropylene (PP), ethylene-1-octene copolymer (EOC) and zinc oxide (ZnO)...
The influence of ethylene–octene copolymer and zinc oxide (ZnO) on structure and tensile stress–stra...
Polyacetal or polyoxymethylene (POM) is one of the most important engineering polymers a...
Abstract: In this paper, PCL with PEG-coated ZnO nanocomposites films were prepared by solution cast...
Self-lubricating behaviour of materials is very demanded in industry. In this study we investigated ...
Self-lubricating behaviour of materials is very demanded in industry. In this study we investigated ...
Polymer composite materials were manufactured as the base material made of low density ethylene usin...
This study aims to find out usage of zinc oxide (ZnO) and 2-hydroxy-4-methoxybenzophenone (BP-3) for...
Polymer composites have established an excellent position among the technologically essential materi...
ABSTRACT: The introduction of inorganic nanomaterials into polymer matrix has resulted in polymer na...
Hydrophobic zinc oxide (ZnO) nanoparticles were produced through grafting aminopropyltriethoxysilane...
In this work we investigate binary blends of polyoxymethylene and ethylene octene copolymer (EOC) an...
Ethylene-octene copolymer (EOC) modified polypropylene (PP) and polyoxymethylene (POM) were used as ...
Ternary nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer and zinc oxide...
In the current research the effect of ZnO nanoparticles on the structure and properties of common th...
Multi-component blends of polypropylene (PP), ethylene-1-octene copolymer (EOC) and zinc oxide (ZnO)...
The influence of ethylene–octene copolymer and zinc oxide (ZnO) on structure and tensile stress–stra...
Polyacetal or polyoxymethylene (POM) is one of the most important engineering polymers a...
Abstract: In this paper, PCL with PEG-coated ZnO nanocomposites films were prepared by solution cast...
Self-lubricating behaviour of materials is very demanded in industry. In this study we investigated ...
Self-lubricating behaviour of materials is very demanded in industry. In this study we investigated ...
Polymer composite materials were manufactured as the base material made of low density ethylene usin...
This study aims to find out usage of zinc oxide (ZnO) and 2-hydroxy-4-methoxybenzophenone (BP-3) for...
Polymer composites have established an excellent position among the technologically essential materi...
ABSTRACT: The introduction of inorganic nanomaterials into polymer matrix has resulted in polymer na...
Hydrophobic zinc oxide (ZnO) nanoparticles were produced through grafting aminopropyltriethoxysilane...