Ag3PO4/TiO2, nanocomposite was fabricated by an in situ precipitation method and then blended into poly(vinylidene fluoride) (PVDF) casting solution to prepare the ultrafiltration membrane via wet phase inversion technique. The water flux and bovine serum albumin (BSA) rejection rate of membrane were investigated; meanwhile, the ultrafiltration membrane morphologies and structural properties were analyzed using scanning electron microscope (SEM) and X-ray diffraction. Compared with the control membrane, the permeate performance of blended membranes was improved while possessing a steady BSA retention due to enhanced hydrophilicity. Mechanical tests revealed that the modified membranes exhibited a larger tensile strength and breakage elongat...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
Stable nanoparticle solution is the key parameter to obtain a uniform coating layer on the membrane ...
Membrane fouling remains one of the most problematic issues surrounding membrane use in water and wa...
In this study, polymeric ultrafiltration (UF) membranes were prepared by phase inversion method to o...
Ultrafiltration (UF) membrane is widely used in many industrial areas and applications. Polyvinylide...
High permeability and antifouling property are important performance of filtration membranes for rea...
Ultrafiltration (UF) membrane is widely used in many industrial areas and applications. Polyvinylide...
In this work, Ag nanoparticle loading Mg(C10H16O4)2(H2O)2(Ag@MOF) composite material was successfull...
Modification of active membrane surface is an auspicious way to enhance the membrane performance. In...
In this study, a unique method was adopted to design porous membranes through crystallization induce...
In this study, a unique method was adopted to design porous membranes through crystallization induce...
With the emergence of membrane fouling as a prominent issue in long-term MD performance, it has beco...
The PVDF flat-membrane was modified by hydrophilic nano-TiO2, which blending by ultrasonication and ...
Nowadays incorporation of nano-materials into polymers becoming a focus research area in membrane se...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
Stable nanoparticle solution is the key parameter to obtain a uniform coating layer on the membrane ...
Membrane fouling remains one of the most problematic issues surrounding membrane use in water and wa...
In this study, polymeric ultrafiltration (UF) membranes were prepared by phase inversion method to o...
Ultrafiltration (UF) membrane is widely used in many industrial areas and applications. Polyvinylide...
High permeability and antifouling property are important performance of filtration membranes for rea...
Ultrafiltration (UF) membrane is widely used in many industrial areas and applications. Polyvinylide...
In this work, Ag nanoparticle loading Mg(C10H16O4)2(H2O)2(Ag@MOF) composite material was successfull...
Modification of active membrane surface is an auspicious way to enhance the membrane performance. In...
In this study, a unique method was adopted to design porous membranes through crystallization induce...
In this study, a unique method was adopted to design porous membranes through crystallization induce...
With the emergence of membrane fouling as a prominent issue in long-term MD performance, it has beco...
The PVDF flat-membrane was modified by hydrophilic nano-TiO2, which blending by ultrasonication and ...
Nowadays incorporation of nano-materials into polymers becoming a focus research area in membrane se...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
In this research, novel ultrafiltration nanocomposite membranes were prepared by incorporating self-...
Stable nanoparticle solution is the key parameter to obtain a uniform coating layer on the membrane ...