Part of special issue: GHGT-11 Proceedings of the 11th International Conference on Greenhouse Gas Control Technologies, 18-22 November 2012, Kyoto, Japan Acknowledgments This work was carried out with financial support from the Spanish MINECO (Project ENE2011-23467), co-financed by the European Regional Development Fund (ERDF).Peer reviewedPublisher PD
Combustion of fossil fuels is one of the major sources of the greenhouse gas CO2. Pressure swing ads...
AbstractIncreasing awareness of the influence of greenhouse gases on global climate change has led t...
Pine cone leaves (PCL) and pine kernel shells (PKS), abundant by-products of the Spanish food indust...
AbstractThis study focuses on how different regeneration conditions affect the performance of two ph...
The performance of two phenol-formaldehyde resin-based activated carbons prepared in our laboratory,...
The challenge of developing effective separation and purification technologies that leave much small...
AbstractThe use of solid sorbents for precombustion CO2 capture, which implies the removal of CO2 fr...
AbstractThe CO2 capture performance in post-combustion conditions (CO2 diluted in nitrogen at near a...
AbstractThe IGCC technology (Integrated Gasification Combined Cycle) with pre-combustion CO2 capture...
The IGCC technology (Integrated Gasification Combined Cycle) with pre-combustion CO2 capture is a pr...
Technology for capturing carbon dioxide (CO2) has been applied in industry for more than 80 years [7...
This research was supported by CCS from Industrial clusters and their Supply chains (CCSInSupply) fu...
AbstractThis paper describes the development of carbon-based adsorbents for CO2 separation in integr...
Integrated Gasification Combined Cycle (IGCC) has been emerged as an efficient alternative to post a...
Carbon Capture and Storage (CCS) has been considered as one of the most promising techniques to redu...
Combustion of fossil fuels is one of the major sources of the greenhouse gas CO2. Pressure swing ads...
AbstractIncreasing awareness of the influence of greenhouse gases on global climate change has led t...
Pine cone leaves (PCL) and pine kernel shells (PKS), abundant by-products of the Spanish food indust...
AbstractThis study focuses on how different regeneration conditions affect the performance of two ph...
The performance of two phenol-formaldehyde resin-based activated carbons prepared in our laboratory,...
The challenge of developing effective separation and purification technologies that leave much small...
AbstractThe use of solid sorbents for precombustion CO2 capture, which implies the removal of CO2 fr...
AbstractThe CO2 capture performance in post-combustion conditions (CO2 diluted in nitrogen at near a...
AbstractThe IGCC technology (Integrated Gasification Combined Cycle) with pre-combustion CO2 capture...
The IGCC technology (Integrated Gasification Combined Cycle) with pre-combustion CO2 capture is a pr...
Technology for capturing carbon dioxide (CO2) has been applied in industry for more than 80 years [7...
This research was supported by CCS from Industrial clusters and their Supply chains (CCSInSupply) fu...
AbstractThis paper describes the development of carbon-based adsorbents for CO2 separation in integr...
Integrated Gasification Combined Cycle (IGCC) has been emerged as an efficient alternative to post a...
Carbon Capture and Storage (CCS) has been considered as one of the most promising techniques to redu...
Combustion of fossil fuels is one of the major sources of the greenhouse gas CO2. Pressure swing ads...
AbstractIncreasing awareness of the influence of greenhouse gases on global climate change has led t...
Pine cone leaves (PCL) and pine kernel shells (PKS), abundant by-products of the Spanish food indust...