Control of temperature and humidity in basement rooms

V diplomskem delu je prikazan način, kako lahko s pomočjo razvojne ploščice Arduino merimo in spremljamo temperaturo in vlago v prostoru. Vse podatke o trenutnem stanju temperature in vlage pošiljamo uporabniku. V jedru naloge so opisani izbrani elementi, predstavljene so metode, s katerimi lahko izvajamo meritve, ter rezultati testiranja. Glede na dane pogoje smo izbrali senzor, ki meri temperaturo in vlago hkrati, in naredili napravo, ki je postavljena v željenem prostoru. Modul je preko kabla povezan do modema in pošilja signal nazaj na spletno stran.In this thesis we will present a way on using the Arduino development board to measure and observe room temperature and humidity. All the current temperature data is sent to the appliance. In the core of this thesis methods of measuring and testing are presented and the elements that are used are described. We used a sensor wich measures temperature and humidity at the same time and built a device which can be situated in a desired room. The module is connected to the modem with a cable and sends data back to the internet page