Rheological study of sludge of membranes bioreactors for water treatment: protocol, limitations and link with the filtration

The submerged membranes bio-reactors (sMBR) are more and more visible in the field of waste water treatment. The membrane fouling, that causes a drastic fall of the performances, can be limited by the application of a swarm of bubbles close to the membrane surfaces. This aeration as a major factor of the energetic expense of these processes, lets numerous studies to focus on the understanding of the mechanisms linking the bubbles swarm with fouling.. In this background, the rheological tools appeared to be useful to understand the behaviour of sludge under shear stress. In order to be sure to get significant results, we used three types of rheological measurements: i) the influence of shear rate on shear stress; ii) the influence of upward then downward stages of shear stress on viscosity; iii) the influence of the alternation of two stages of shear stress with implementation times identical to those of sMBR aeration. Besides a viscoplastic behaviour previously observed, a phenomenon of hysteresis appeared. The transparent upper plan used on the rheometer exhibited formations of aggregative structures “in roll”. Sludges of a sMBR using different sequencing of aeration are compared: the developed protocols enabled to differentiate those sludges, with characteristic results depending on mechanical applications. The aim of this work is, eventually, to propose some correlations between usual characteristics of the process and aeration operating parameters, in order to propose an aeration policy improving energetic performances