Sintering and densification of nanocrystalline ceramic oxide powders: a review

Observation of the unconventional properties and material behaviour expected in the nanometre grain size range necessitates the fabrication of fully dense bulk nanostructured ceramics. This is achieved by the application of ceramic nanoparticles and suitable densification conditions, both for the green and sintered compacts. Various sintering and densification strategies were adopted, including pressureless sintering, hot pressing, hot isostatic pressing, microwave sintering, sinter forging, and spark plasma sintering. The theoretical aspects and characteristics of these processing techniques, in conjunction with densification mechanisms in the nanocrystalline oxides, were discussed. Spherical nanoparticles with narrow size distribution are crucial to obtain homogeneous density and low pore-to-particle-size ratio in the green compacts, and to preserve the nanograin size at full densification. High applied pressure is beneficial via the densification mechanisms of nanoparticle rearrangement and sliding, plastic deformation, and pore shrinkage. Low temperature mass transport by surface diffusion during the spark plasma sintering of nanoparticles can lead to rapid densification kinetics with negligible grain growth