In this paper, the bow-tie microstrip antennas have been designed with two different angles of 40° and 80°. An investigaton on the effect of the angle to the return loss and radiation patterns had been carried out. The impedance matching network with the niicrostrip transmission line feeding was used in this study. Simulation and measurement results for the return loss and radiation patterns were presented
This paper described the design, simulation and fabrication of the microstrip patch antennas at 2.4 ...
For printed antenna systems, microstrip feeding networks may become quite complex, including several...
An analysis of bow-tie microstrip antennas is presented based on the use of the modified locally con...
The goal of this work was to design, simulate, build, and test bow-tie antenna for 5G networks. In t...
In this paper, a microstrip bowtie patch antenna (MBPA) for wireless indoor communications is carrie...
A single-fed linearly polarized 2x2 microstrip bow tie array antenna is proposed. The feed network h...
This paper presents design, simulation, fabrication and measurement of a modified bow-tie antenna wi...
The purpose of this paper is to design a highly directive, low cost, low profile and easily reproduc...
Abstract This paper presents a study on use of micro strip antenna and Planar Inverted-F Antenna in ...
In this paper, a novel compact bow-tie shaped microstrip patch antenna for wide-band application is ...
Abstract — This paper presents the modeling, simulations, fabrications and analysis of microstrip pa...
An ultra-broadband bow-tie with a VSWR < 2 from 5 to 60 GHz is revealed. The bow-tie antenna shows f...
Many types of antennas work on the UHF band, including a 1 / 2l dipole antenna, Yagi-Uda array anten...
In this paper. a low profile microstrip patch antenna is presented. The FR4 substrate is chosen for ...
This paper described the design, simulation and fabrication of the microstrip patch antennas at 2.4 ...
This paper described the design, simulation and fabrication of the microstrip patch antennas at 2.4 ...
For printed antenna systems, microstrip feeding networks may become quite complex, including several...
An analysis of bow-tie microstrip antennas is presented based on the use of the modified locally con...
The goal of this work was to design, simulate, build, and test bow-tie antenna for 5G networks. In t...
In this paper, a microstrip bowtie patch antenna (MBPA) for wireless indoor communications is carrie...
A single-fed linearly polarized 2x2 microstrip bow tie array antenna is proposed. The feed network h...
This paper presents design, simulation, fabrication and measurement of a modified bow-tie antenna wi...
The purpose of this paper is to design a highly directive, low cost, low profile and easily reproduc...
Abstract This paper presents a study on use of micro strip antenna and Planar Inverted-F Antenna in ...
In this paper, a novel compact bow-tie shaped microstrip patch antenna for wide-band application is ...
Abstract — This paper presents the modeling, simulations, fabrications and analysis of microstrip pa...
An ultra-broadband bow-tie with a VSWR < 2 from 5 to 60 GHz is revealed. The bow-tie antenna shows f...
Many types of antennas work on the UHF band, including a 1 / 2l dipole antenna, Yagi-Uda array anten...
In this paper. a low profile microstrip patch antenna is presented. The FR4 substrate is chosen for ...
This paper described the design, simulation and fabrication of the microstrip patch antennas at 2.4 ...
This paper described the design, simulation and fabrication of the microstrip patch antennas at 2.4 ...
For printed antenna systems, microstrip feeding networks may become quite complex, including several...
An analysis of bow-tie microstrip antennas is presented based on the use of the modified locally con...