Abstract- Multi-Gbps serial link transmitter for both off-chip and on-chip transmission are presented. For off-chip transmission, a new pre-emphasis design methodology and circuits for a 4/2 PAM transmitter over cable are proposed. A test chip of transmitter with pre-emphasis, PLL circuit and on-chip termination resistors is implemented using tsmc 0.18 um CMOS process. The measurement results of 10/5 Gbps (4/2 PAM) are carried out over 5 meter (m) long cable and is in agreement with our analysis and simulation results. For on-chip transmission, SerDes based serial link architecture is used in on-chip application. Using tsmc 0.13 um CMOS process, the operation speed and power consumption are 5 Gbps and 3.2 mW respectively with the interconne...
Graduation date: 2012Access restricted to the OSU Community at author's request from Dec. 2, 2011 - ...
This paper presents a fully integrated physical layer (PHY) transmitter (TX) suiting for multiple in...
A digital transmitter pre-emphasis technique is presented that is based on pulse-width modulation, i...
The design of a 4 Gbps serial link transceiver in 0.35µm CMOS process is presented. The major factor...
This project is to design two types of transmitter and receiver used in the serial link transmission...
link has been designed and integrated in a O.8-pm CMOS process. An experimental receiving front-end ...
The performance of many digital systems today is limited by the interconnection bandwidth between ch...
On-chip global communication is required for data and control transfers across various modules on th...
The demand for off-chip data bandwidth of serial-link transceivers have been pushed beyond 40-Gb/s/l...
A bidirectional serial link on-chip implementation is going to be assessed so as to set the option o...
University of Minnesot Ph.D. dissertation. November 2008. Major: Electrical Engineering. Advisor: Dr...
International audienceWe present a 3.2-Gb/s serial link transmitter for MAPS application in future s...
With the recent surge in the demand for high data rates, communication over copper media faces new c...
Abstract: Now a days in network-on-chip (Noc) different type of communication links are used like pa...
A power-efficient and low-cost 1.0625-3.125 Gb/s serial transceiver is presented in this paper for F...
Graduation date: 2012Access restricted to the OSU Community at author's request from Dec. 2, 2011 - ...
This paper presents a fully integrated physical layer (PHY) transmitter (TX) suiting for multiple in...
A digital transmitter pre-emphasis technique is presented that is based on pulse-width modulation, i...
The design of a 4 Gbps serial link transceiver in 0.35µm CMOS process is presented. The major factor...
This project is to design two types of transmitter and receiver used in the serial link transmission...
link has been designed and integrated in a O.8-pm CMOS process. An experimental receiving front-end ...
The performance of many digital systems today is limited by the interconnection bandwidth between ch...
On-chip global communication is required for data and control transfers across various modules on th...
The demand for off-chip data bandwidth of serial-link transceivers have been pushed beyond 40-Gb/s/l...
A bidirectional serial link on-chip implementation is going to be assessed so as to set the option o...
University of Minnesot Ph.D. dissertation. November 2008. Major: Electrical Engineering. Advisor: Dr...
International audienceWe present a 3.2-Gb/s serial link transmitter for MAPS application in future s...
With the recent surge in the demand for high data rates, communication over copper media faces new c...
Abstract: Now a days in network-on-chip (Noc) different type of communication links are used like pa...
A power-efficient and low-cost 1.0625-3.125 Gb/s serial transceiver is presented in this paper for F...
Graduation date: 2012Access restricted to the OSU Community at author's request from Dec. 2, 2011 - ...
This paper presents a fully integrated physical layer (PHY) transmitter (TX) suiting for multiple in...
A digital transmitter pre-emphasis technique is presented that is based on pulse-width modulation, i...