Research Article The Three-Dimensional Numerical Simulation and Experimental Research on Screw Compressor

Copyright © He Xueming et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This paper presents themathematical model of screw compressors ’ working process, in which the internal flow domains are divided into three kinds of fluids—the inlet fluid, the primitive volume fluid, and outlet fluid. Grid interface method and dynamic mesh technique of Computational Fluid Dynamics (CFD) theory were utilized to simulate the suction, compression, and discharge process in order to model the dynamic characteristics of the flow domains in a screw compressor. To verify that the model is numerically accurate and the simulation method is effective, experiments on the pressure-volume changes in screw compressor were carried out. The result has shown that the simulation data is in good agreement with the experimental data. Therefore, the numerical calculation model and the simulation method can be very useful for the screw compressor design and research. 1