A Laser triggered Electron Source for Pulsed Radiolysis, Particle Accelerator Conference (New York

We present the design of a photo-injector based accelerator for pulsed radiolysis applications. This machine is destined to meet the needs of the physical chemistry community at the Université de Paris XI. A 4 MeV electron pulse of a few picoseconds duration and with a charge in the range of 1 to 10 nC is produced from a Cs2-Te photocathode. The photocathode is placed in the half cell of a 1-1/2 cell, 3 GHz RF gun, whose design is based on the gun used for the drive beam of the CERN CLIC Test facilty. A 4 cell † booster † cavity is then used to accelerate the beam to an energy of 9 MeV. The transport system consists of a quadrupole triplet downsteam of the booster, two rectangular, 30 degree bend, dipoles with a pair of quadrupoles between them and a second triplet downstream of the second dipole. Energy dependent path length effects in the two dipoles allow the possibilty of magnetic bunch compression depending on the phase-energy correlation of the bunch exiting the booster cavity. The beam envelope and the bunch length have been calculated through the transport line using TRACE-3d and PARMELA. These codes allow us to verify the required beam parameters at the experimental areas. We will discuss the adjustment of the optics, aimed at producing the minimum electron bunch length at the experimental targets.