Experimental and Numerical Analysis of Single Phase Flow in a micro T- junction

Abstract In this work the fluid-dynamic behaviour of a micro T-junction has been investigated both numerically and experimentally for low Reynolds numbers (Re<14) with water as working fluid. The velocity profiles within the T-junction has been experimentally determined by using the micro Particle Image Velocimetry (µPIV). The experimental data have been compared with the numerical results obtained by means of a 3D model implemented in Comsol Multiphysics ® environment for incompressible, isothermal, laminar flows with constant properties. The comparison between the experimental and the numerical data puts in evidence a perfect agreement among the results. In the central region of the T-junction where the velocity profiles of the inlet branches interact, the maximum difference is less than 5.8 % for different flow rates imposed at the inlet (with the ratio 1:2) and less than 4.4 % in the case of the same flow rate at the inlets (1:1). Since the estimated uncertainty of the experimental velocity is about 3%, the obtained result can be considered very good and it demonstrates that no significant scaling effects influences the liquid mixing for low Reynolds numbers (Re<14) and the behaviour of the micro T-junction can be considered as conventional. The detailed analysis of the velocity profile evolution within the central region of the mixer has allowed to determine where the fully developed laminar profile is reached (for instance 260 µm far from the centre of the T-junction when a maximum water flow rate of 8 ml/h is considered)