modulator with 1.5-b quantizer and feedback digital-to-analog converter (DAC) for a universal mobile telecommunication system (UMTS) receiver chain is presented. It achieves a dynamic range of 70 dB in a 2-MHz bandwidth and the total harmonic distortion is 74 dB at full-scale input. When used in an integrated receiver for UMTS, the dynamic range of the modulator substantially reduces the need for analog automatic gain control and its tolerance of large out-of-band interference also permits the use of only first-order prefiltering. An IC including an and modulator, phase-locked loop, oscillator, and bandgap dissipates 11.5 mW at 1.8 V. The active area is 0.41 mm2 in a 0.18- m 1-poly 5-metal CMOS technology. Index Terms—1.5-b converter,ADC, ...
The paper presents a multi-mode analog-to-digital converter suited for wireless receivers that can h...
A fully integrated UMTS receiver front-end comprising LNA, mixers, VGAs, double frequency VCO, secon...
A dual-mode second-order Multirate Multibit Sigma Delta (MM-SD) modulator is implemented in a 90nm ...
A quadrature fourth-order, continuous-time, S¿ modulator with 1.5-b quantizer and feedback digital-t...
The authors present a 4th-order continuous-time S¿ modulator with 1.5 b quantizer and feedback DAC f...
This paper presents a 0.18-μm CMOS direct-conversion IC realized for the Universal Mobile Telecommun...
A large part of the power consumption for mobile communications can be allotted to power amplifiers....
Abstract—Time jitter in continuous-time modulators is a known limitation on the maximum achievable...
Time jitter in continuous-time S¿ modulators is a known limitation on the maximum achievable signal-...
This paper presents a radio frequency (RF) continuous-time band-pass delta sigma modulator (CT BP DS...
This paper describes the design and measurement results of a supply modulator for a PA for GSM, EDGE...
This paper presents a 2.2 GHz continuous-time Δ Σ ADC that achieves-102 dBc THD and 77 dB SNDR in 25...
In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post...
The paper presents a multi-mode analog-to-digital converter suited for wireless receivers that can h...
A fully integrated UMTS receiver front-end comprising LNA, mixers, VGAs, double frequency VCO, secon...
A dual-mode second-order Multirate Multibit Sigma Delta (MM-SD) modulator is implemented in a 90nm ...
A quadrature fourth-order, continuous-time, S¿ modulator with 1.5-b quantizer and feedback digital-t...
The authors present a 4th-order continuous-time S¿ modulator with 1.5 b quantizer and feedback DAC f...
This paper presents a 0.18-μm CMOS direct-conversion IC realized for the Universal Mobile Telecommun...
A large part of the power consumption for mobile communications can be allotted to power amplifiers....
Abstract—Time jitter in continuous-time modulators is a known limitation on the maximum achievable...
Time jitter in continuous-time S¿ modulators is a known limitation on the maximum achievable signal-...
This paper presents a radio frequency (RF) continuous-time band-pass delta sigma modulator (CT BP DS...
This paper describes the design and measurement results of a supply modulator for a PA for GSM, EDGE...
This paper presents a 2.2 GHz continuous-time Δ Σ ADC that achieves-102 dBc THD and 77 dB SNDR in 25...
In this paper, a novel universal receiver baseband approach is introduced. The chain includes a post...
The paper presents a multi-mode analog-to-digital converter suited for wireless receivers that can h...
A fully integrated UMTS receiver front-end comprising LNA, mixers, VGAs, double frequency VCO, secon...
A dual-mode second-order Multirate Multibit Sigma Delta (MM-SD) modulator is implemented in a 90nm ...