Mechanical and Optical Behavior of A Novel Optical Fiber Crack Sensor and An Interferometric Strain Sensor

The proper interpretation of measurements from an optical fiber sensor requires a full understanding of its mechanical response to external action and the corresponding change in optical output. To quantify the mechanical behavior it is necessary to know the mechanical properties of the fiber coatings. A new method for measuring the coating stiffness directly on the fiber uses nano-indentation. Special sample preparation and testing procedures were developed for the measurement of very low modulus materials using the Nano Indenter II. Results are obtained for two different acrylate coated optical fibers, namely Corning SMF28 and 3M FS-SN-4228. These results are used in understanding the behavior of the novel crack sensor and of an interferometric strain sensor. A distributed crack sensor that does not require prior knowledge of crack location and employs a small number of fibers to monitor a large number of cracks is developed. The basic design of the sensor is a polymer sheet containing an inclined fiber that is coupled to a structure. The sensor principle is that cracking in the structural member leads t