Add to ORKGThe effect of temperature (in the 800 to 900 ºC range) and steam/plastic mass ratio (between 0 and 2) on the products of steam gasification of high density polyethylene was studied. The spouted bed reactor has an excellent performance between 850 and 900 ºC. The increase of steam/plastic ratio from 1 to 2 only improves slightly the results
In this study, the steam gasification of rubber seed shell and high density polyethylene mixtures we...
Pyrolysis is now considered an appropriate technology in dealing with waste problems, such as waste ...
Thermoset waste plastics from a cable materials company have been processed using pyrolysis/gasifica...
Polyethylene terephthalate (PET) is widely used in textile fiber, film, and bottles. Although PET bo...
A fluidized bed reactor was used to study the gas composition of solid waste steam gasification. Two...
The catalytic co-gasification of rubber seed shell (RSS) and high density polyethylene (HDPE) mixtur...
Polypropylene/biomass waste composites and their constituents were gasified with steam by a two-stag...
Pyrolysis of plastics is one of the efficient ways to recover plastic waste. Pyrolysis refers to a t...
A range of process conditions, including the type of reactor, the reacting atmosphere and the presen...
On a large scale, amount of pyrolytic gas generated and their components has a very important role i...
Pyrolysis as a technique of chemical recycling of plastic materials is causing an increasing leve...
Today, only 15% of the plastic waste in Europe is recycled. However, the existing recycling processe...
Gasification is a thermochemical process that aims to convert solid fuels into a synthetic gas that ...
Plastics are produced in a large qantity for various uses. Therefore the amount of waste plastics is...
[EN] The performance of both fluidized and spouted bed reactors in the pyrolysis of waste plastics i...
In this study, the steam gasification of rubber seed shell and high density polyethylene mixtures we...
Pyrolysis is now considered an appropriate technology in dealing with waste problems, such as waste ...
Thermoset waste plastics from a cable materials company have been processed using pyrolysis/gasifica...
Polyethylene terephthalate (PET) is widely used in textile fiber, film, and bottles. Although PET bo...
A fluidized bed reactor was used to study the gas composition of solid waste steam gasification. Two...
The catalytic co-gasification of rubber seed shell (RSS) and high density polyethylene (HDPE) mixtur...
Polypropylene/biomass waste composites and their constituents were gasified with steam by a two-stag...
Pyrolysis of plastics is one of the efficient ways to recover plastic waste. Pyrolysis refers to a t...
A range of process conditions, including the type of reactor, the reacting atmosphere and the presen...
On a large scale, amount of pyrolytic gas generated and their components has a very important role i...
Pyrolysis as a technique of chemical recycling of plastic materials is causing an increasing leve...
Today, only 15% of the plastic waste in Europe is recycled. However, the existing recycling processe...
Gasification is a thermochemical process that aims to convert solid fuels into a synthetic gas that ...
Plastics are produced in a large qantity for various uses. Therefore the amount of waste plastics is...
[EN] The performance of both fluidized and spouted bed reactors in the pyrolysis of waste plastics i...
In this study, the steam gasification of rubber seed shell and high density polyethylene mixtures we...
Pyrolysis is now considered an appropriate technology in dealing with waste problems, such as waste ...
Thermoset waste plastics from a cable materials company have been processed using pyrolysis/gasifica...