Physicochemical Characterization of Limestone Deposits at Ewekoro, Ogun State, South-West of Nigeria and the Environment Impact

Limestone is the primary constituent raw material for cement manufacture. While most limestone deposits are suitable for cement making, there are some characteristics of limestone which need to be defined in order to establish a usable raw material supply. These relate to compositional requirements and also the consistency of the deposit in chemical and physical terms. Limestone makes up about 10 % of the total volume of all sedimentary rocks. The solubility of limestone in water and weak acid solutions leads to karst landscapes, in which water erodes the limestone over thousands to millions of years. The density and porosity of samples from the various locations vary from 2.61g/cm 3 to 2.72g/cm 3 and 2.70 % to 3.80%. The Schmidt hammer rebound number of samples from Ewekoro quarry varies from 32.1 to 33.6. The uniaxial compressive strength of samples from Ewekoro quarry varies from 60.5 MPa to 63.5 MPa thereby classifying the rock as moderate to high strength. The point load strength index is obtained from the LAFARGE laboratory results and varies from 1.23