Analyzing an UWB Bandpass Filter for High Power Applications Using Rectangular

Using the finite element method (FEM) in two dimensions and the CST MICROWAVE STUDIO ® (CST MWS) Transient Solver, the electromagnetic (EM) analysis and the design of a novel compact ultra wide-band (UWB) bandpass filter using rectangular coaxial cables with square inner conductors, convenient for high power applications, are presented. The design of the UWB BP filter is based on the use of impedance steps and coupled-line sections. The center frequency around 6.85 GHz was selected, the bandwidth is be-tween 3- 10 GHz, the insertion-loss amounts to around 0.35 dB and the return loss is found higher than 10 dB in a large frequency range 4- 9.5 GHz. The simulated results of stopband performances are better than 15 dB for a frequency range up to 11 GHz. For the selected center frequency and on a substrate with a dielectric constant of 2.03, the rectangular coaxial cables BPF with square inner conductors is only 6.7 × 8.9 × 33.4 mm in size