With the stated advantages of finer adsorbent of high surface area, why then do manufacturers design unspecified active carbons of granular size even for the removal of medium size particles? This research attempt to provide one of such answers. A batch equilibrium adsorption study was carried out to assess the adsorption capacity and intensities of methyl red dye onto “Received ” Granular Activated Carbon (GAC) and “formulated ” Powdered Activated Carbon (PAC). The equilibrium data obtained were modeled using the Langmuir and Freundlich Isotherms. The data fitted best with the Langmuir model which was predicted by the highest R2 value (0.981). The experiment carried out demon-strated that GAC had a higher adsorption efficiency range of 33....
Activated carbon (MHAC) has been derived from the millet cob husk in a single step activation at a t...
The rapid small-scale column test (RSSCT) has become a popular method for sizing granulated activate...
The effect of four different parameters such as pH, initial phenol concentration, adsorbent dose an...
The adsorption of methylene blue (MB) on three commercial granular activated carbons (GACs), 12 × 40...
The applicability of statistical Goodness-of-Fit Measures (GoFMs) and a new measure, Fractional Theo...
This study investigated the adsorption properties of demineralised activated carbon adsorbents produ...
The present paper approaches the study of the adsorption of an acid dye on a commercial granular act...
In this study, the effects of activation time and temperature, as two of the most prominent paramete...
Vapor phase carbon adsorption systems are used to remove aromatics, aliphatics, and halogenated hydr...
The use of dyes that pollute the earth and adversely affect the health of human beings is increasing...
The performance characteristics of two activated carbons and eight synthetic adsorbents are compared...
The objective of this laboratory study was to determine the effect of dosage, contact time and type ...
This article reports on the liquid phase adsorption of flavour esters onto granular activated carbon...
Introduction and purpose: Sunset yellow FCF is a hazardous azo dye pollutant found in food processin...
The fixed bed adsorption of acid dyes on activated carbon was studied. Acid Blue 80 (AB80), Acid Red...
Activated carbon (MHAC) has been derived from the millet cob husk in a single step activation at a t...
The rapid small-scale column test (RSSCT) has become a popular method for sizing granulated activate...
The effect of four different parameters such as pH, initial phenol concentration, adsorbent dose an...
The adsorption of methylene blue (MB) on three commercial granular activated carbons (GACs), 12 × 40...
The applicability of statistical Goodness-of-Fit Measures (GoFMs) and a new measure, Fractional Theo...
This study investigated the adsorption properties of demineralised activated carbon adsorbents produ...
The present paper approaches the study of the adsorption of an acid dye on a commercial granular act...
In this study, the effects of activation time and temperature, as two of the most prominent paramete...
Vapor phase carbon adsorption systems are used to remove aromatics, aliphatics, and halogenated hydr...
The use of dyes that pollute the earth and adversely affect the health of human beings is increasing...
The performance characteristics of two activated carbons and eight synthetic adsorbents are compared...
The objective of this laboratory study was to determine the effect of dosage, contact time and type ...
This article reports on the liquid phase adsorption of flavour esters onto granular activated carbon...
Introduction and purpose: Sunset yellow FCF is a hazardous azo dye pollutant found in food processin...
The fixed bed adsorption of acid dyes on activated carbon was studied. Acid Blue 80 (AB80), Acid Red...
Activated carbon (MHAC) has been derived from the millet cob husk in a single step activation at a t...
The rapid small-scale column test (RSSCT) has become a popular method for sizing granulated activate...
The effect of four different parameters such as pH, initial phenol concentration, adsorbent dose an...