Add to ORKGABSTRACT: The interlaminar Mode II critical strain energy release rates of unidirec-tional graphite/epoxy, graphite/polyetheretherketone (PEEK), and graphite/epoxy with interleaf material were characterized using the End Notch Flexural (ENF) and Center Notch Flexural (CNF) test specimens. The CNF test method was developed specifically for this study. Compliance and strain energy release rate expressions of the CNF are derived and are in good agreement with finite element results for a wide range of crack lengths. Mode II critical energy release rates for both test methods were found to be in quite good agreement
A new four-point bending plate (4PBP) test was used for characterising the mode III interlaminar fra...
Procedures for measuring the crack initiation and arrest toughnesses in Mode II interlaminar fractur...
The Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) specimens are employed to charact...
ABSTRACT: The Mode II interlaminar fracture of unidirectional graphite/epoxy (AS4/2220-3) and graphi...
This paper deals with the correction of mode II strain energy release rate, G(II), of composite lami...
Graduation date: 1984Three approaches for evaluating mode I interlaminar strain energy\ud release ra...
A finite element analysis of the end notch flexure specimen for mode II interlaminar fracture toughn...
This paper describes an experimental study involving double cantilever beam (DCB), end-notched flexu...
This paper deals with two-dimensional Finite Element Analysis of the End Notched Flexure (ENF) speci...
ABSTRACT: Three and four-point bend end-notched flexure tests, comprising a number of different test...
The interlaminar fracture and the low-velocity impact behavior of carbon/epoxy composite materials h...
Abstract: Mathematical formulation for the stress analysis of symmetric multidirectional end notch f...
The critical strain energy release rates associated with debonding of the adhesive bondlines in grap...
A numerical study was performed on the mode II interlaminar critical strain energy release rate (GII...
Mathematical modelling, for the stress analysis of symmetric composite end notch flexure (ENF) speci...
A new four-point bending plate (4PBP) test was used for characterising the mode III interlaminar fra...
Procedures for measuring the crack initiation and arrest toughnesses in Mode II interlaminar fractur...
The Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) specimens are employed to charact...
ABSTRACT: The Mode II interlaminar fracture of unidirectional graphite/epoxy (AS4/2220-3) and graphi...
This paper deals with the correction of mode II strain energy release rate, G(II), of composite lami...
Graduation date: 1984Three approaches for evaluating mode I interlaminar strain energy\ud release ra...
A finite element analysis of the end notch flexure specimen for mode II interlaminar fracture toughn...
This paper describes an experimental study involving double cantilever beam (DCB), end-notched flexu...
This paper deals with two-dimensional Finite Element Analysis of the End Notched Flexure (ENF) speci...
ABSTRACT: Three and four-point bend end-notched flexure tests, comprising a number of different test...
The interlaminar fracture and the low-velocity impact behavior of carbon/epoxy composite materials h...
Abstract: Mathematical formulation for the stress analysis of symmetric multidirectional end notch f...
The critical strain energy release rates associated with debonding of the adhesive bondlines in grap...
A numerical study was performed on the mode II interlaminar critical strain energy release rate (GII...
Mathematical modelling, for the stress analysis of symmetric composite end notch flexure (ENF) speci...
A new four-point bending plate (4PBP) test was used for characterising the mode III interlaminar fra...
Procedures for measuring the crack initiation and arrest toughnesses in Mode II interlaminar fractur...
The Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) specimens are employed to charact...