Abstract: Wettability and interface microstructure were studied for Nb-containing melts in the contact with ceramic oxide materials of Al2O3-SiO2 system. Ni-40.5 at.%Nb and Au-(0-20) at.%Nb alloys were investigated as prospective alloys for high temperature brazes. Ceramic samples ranged in composition from pure Al2O3 to pure SiO2. The wettability was measured by the sessile drop method. Microstructure of the oxide/metal interface was investigated by scanning electron microscopy and X-ray diffraction methods. The results showed that contact angles decreased with the increase of SiO2 content in the solid substrate for all the melts. Al2O3 was dissolved insignificantly in the melts under study. SiO2 formed intermediate chemical compounds at t...
AbstractThe present paper considers the microstructures of Al–Mg/oxide ceramic interpenetrating comp...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with α-Al2O3 by means of la...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with alpha-Al2O3 by means o...
To obtain appropriate crucible materials for vacuum induction melting of MCrAlY alloys, four differe...
Non-oxide ceramics, such as carbides, nitrides and borides represent one of the fastest growing clas...
This study presents data on the wettability and the interfacial characteristics of systems based on ...
Ceramic/metal brazing can be carried out either directly using active metal filler alloys or indirec...
During the last 20 years, ceramic fiber reinforced metal matrix composites, referred to as MMCs, hav...
Transition metals diborides (Ti,Zr,Hf)B2 play a key role in applications where stability at extremel...
A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (C...
Transient-liquid-phase (TLP) bonding was used to join high-strength, high-purity Al2O3 ceramic. This...
Wetting and reactivity were studied for molten Cu-Cr, Cu-Zr and Ag-Zr alloys on two nitride ceramics...
When designing high-temperature brazing processes for ceramic materials, the interfacial phenomena b...
Nb films are deposited on single crystal Al2O3 (11 (2) over bar0) and MgO(111) substrates by e-beam ...
NASCIMENTO,R.M. et al.Interface microstructure of alumina mechanically metallized with Ti brazed to ...
AbstractThe present paper considers the microstructures of Al–Mg/oxide ceramic interpenetrating comp...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with α-Al2O3 by means of la...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with alpha-Al2O3 by means o...
To obtain appropriate crucible materials for vacuum induction melting of MCrAlY alloys, four differe...
Non-oxide ceramics, such as carbides, nitrides and borides represent one of the fastest growing clas...
This study presents data on the wettability and the interfacial characteristics of systems based on ...
Ceramic/metal brazing can be carried out either directly using active metal filler alloys or indirec...
During the last 20 years, ceramic fiber reinforced metal matrix composites, referred to as MMCs, hav...
Transition metals diborides (Ti,Zr,Hf)B2 play a key role in applications where stability at extremel...
A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (C...
Transient-liquid-phase (TLP) bonding was used to join high-strength, high-purity Al2O3 ceramic. This...
Wetting and reactivity were studied for molten Cu-Cr, Cu-Zr and Ag-Zr alloys on two nitride ceramics...
When designing high-temperature brazing processes for ceramic materials, the interfacial phenomena b...
Nb films are deposited on single crystal Al2O3 (11 (2) over bar0) and MgO(111) substrates by e-beam ...
NASCIMENTO,R.M. et al.Interface microstructure of alumina mechanically metallized with Ti brazed to ...
AbstractThe present paper considers the microstructures of Al–Mg/oxide ceramic interpenetrating comp...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with α-Al2O3 by means of la...
A novel process was developed to firmly coat an aluminium alloy, Al6061, with alpha-Al2O3 by means o...