Add to ORKGSpray pyrolysis method that used to prepare Cu:NiO thin films onto glass substrate with various annealing temperature. Spectral transmittance of prepared thin films determined by UV-Visible spectrophotometer in the range of (380-900) nm. The transmittance decreased with increasing annealing temperature. While the absorption coefficient and extinction coefficient increased with increasing annealing temperature. Energy gap decreased from 2.9 eV before annealing to 2.78 eV after 500 ºC annealing temperature
Fe2O3 thin films that doped by NiO were obtained on glass substrates by the chemical spray pyrolysis...
CuO thin films were deposited by spray ultrasonic pyrolysis with different precursor solution. Two s...
International audienceIn this article are investigated the optical and structural properties of copp...
Nickel oxide thin films were prepared by spray pyrolysis, using nickel chloride as precursor at the ...
Electochromic material came to public attention around 30 years ago, nickel oxide(NiO) thin film(whi...
Copper oxide/nickel oxide (CuO/NiO) thin films were deposited on glass substrates by the Physical va...
Nickel oxide thin films were deposited by a simple and low-cost spray pyrolysis technique using thre...
A simple and low-cost procedure (spray pyrolysis) was used to elaborate a copper oxide thin films on...
Undoped Nickel oxide (NiO) thin films were deposited on 500 ˚C heated glass using spray pyrolysis t...
In this work, nickel-cobalt oxide (Ni(1-x)CoxO) thin films, where x = 0, 4, 6 and 8 % have been succ...
In this work, the suitability of CuO thin films on gas sensors and solar cells applications was inve...
Copper oxide (CuO) thin films have been synthesized on to glass substrates at different temperatures...
Copper oxide (CuO) thin films were deposited on well cleaned glass substrates by spray pyrolysis tec...
Nickel oxide (NiO) thin film has been deposited on a glass substrate at a temperature of 390˚C ± 10˚...
In this paper, copper oxide (CuO) thin films were deposited on polyimide plastic substrates by...
Fe2O3 thin films that doped by NiO were obtained on glass substrates by the chemical spray pyrolysis...
CuO thin films were deposited by spray ultrasonic pyrolysis with different precursor solution. Two s...
International audienceIn this article are investigated the optical and structural properties of copp...
Nickel oxide thin films were prepared by spray pyrolysis, using nickel chloride as precursor at the ...
Electochromic material came to public attention around 30 years ago, nickel oxide(NiO) thin film(whi...
Copper oxide/nickel oxide (CuO/NiO) thin films were deposited on glass substrates by the Physical va...
Nickel oxide thin films were deposited by a simple and low-cost spray pyrolysis technique using thre...
A simple and low-cost procedure (spray pyrolysis) was used to elaborate a copper oxide thin films on...
Undoped Nickel oxide (NiO) thin films were deposited on 500 ˚C heated glass using spray pyrolysis t...
In this work, nickel-cobalt oxide (Ni(1-x)CoxO) thin films, where x = 0, 4, 6 and 8 % have been succ...
In this work, the suitability of CuO thin films on gas sensors and solar cells applications was inve...
Copper oxide (CuO) thin films have been synthesized on to glass substrates at different temperatures...
Copper oxide (CuO) thin films were deposited on well cleaned glass substrates by spray pyrolysis tec...
Nickel oxide (NiO) thin film has been deposited on a glass substrate at a temperature of 390˚C ± 10˚...
In this paper, copper oxide (CuO) thin films were deposited on polyimide plastic substrates by...
Fe2O3 thin films that doped by NiO were obtained on glass substrates by the chemical spray pyrolysis...
CuO thin films were deposited by spray ultrasonic pyrolysis with different precursor solution. Two s...
International audienceIn this article are investigated the optical and structural properties of copp...