Studies on Thermal, Mechanical and Morphological Behaviour of Caprolactam Blocked Methylenediphenyl Diisocyanate and Bismaleimide Modified Epoxy Matrices

Diglycidyl ether of bisphenol A epoxy resin (DGEBA) was toughened with 5%, 10%and 15 % (by wt) of caprolactam blocked methylenediphenyl diisocyanate (CMDI)using 4,4‘- diaminodiphenylmethane (DDM) as curing agent. The toughened epoxy resin was further modified with chemical modifier N, N‘-bismaleimido-4, 40-diphenylmethane (BMI).Caprolactam blocked methylenediphenyl diisocyanate was synthesized by the reaction of caprolactam with methylenediphenyl diisocyanate in presence of carbon tetrachloride under nitrogen atmosphere. Thermal properties of the developed matrices were characterized by means of differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), heat distortion temperature (HDT) and dynamic mechanical analysis (DMA). Mechanical properties like tensile strength, flexural strength and impact strength were tested as per ASTM standards. The glass transition temperature (Tg) and thermal stability were decreased with increase in the percentage incorporation of CMDI. The thermomechanical properties of caprolactam blocked methylenediphenyl diisocyanate toughened epoxy resin were increased by increasing the percentage incorporation of bismaleimide. The values of impact strength for epoxy resin were increased with increase in the percentage concentration of CMDI. The homogeneous morphology of CMDI toughened epoxy resin and bismaleimide modified CMDI toughened epoxy resin system was ascertained from scanning electron microscope (SEM)