Published online Radiation measurements with heat-proof

This study demonstrates that the energy resolution of a newly developed 100 per cent pure polyvinyltoluene (PVT) plate allows its use as a base material for a plastic scintillator. The energy resolution, which is a key element for high-performance radiation detectors, was DE/E = 8.41 ± 0.07 % (full width at half maximum (FWHM)) for 976 keV K-line conversion electrons from a 207Bi source. On the basis of results from 207Bi and 137Cs sources, the observed energy resolution of the PVT plate, DE/E = 8.2/E1/2% (FWHM), was slightly better than that of a typical plastic scintillator (BC-408), DE/E = 8.7/E1/2 % (FWHM), with E in units of MeV. These results prompted us to search for other new base materials for plastic scintillators. In this study, we examined polyethylene terephthalate (PET) bottles, a common source of domestic plastic waste. We demonstrated that a lump of heat-proof PET bottles is fluorescent; moreover, there is excellent compatibility of the fluorescence with the quantum efficiency of typical photomultiplier tubes. This inexpensive source of plastic appears suitable for radiation measurements and as a base material for plastic scintillators. Future studies on the radiation response of plastics should lead to the development of higher performance and more eco-friendly radiation detectors