potential. Nickel ion may migrate hrough the oxide layer from the metal surface toward the electrode/electrolyte in-terface, and is deposited as fluoride in a well-dehydrated melt. The concentration ratio NiF = to NiO = on the outer surface of oxide layer is large in comparison with that on the inside. The oxide layer deposited in molten CsF. NH~F 9 4HF containing water is less electrically conductive than that in a well-dehydrated melt mainly because of the for-mation of the thicker oxide layer on the nickel anode9 The current loss caused by dissolution of the nickel an-ode is approximately I ~ 5 % of the total depending on the potential. The corrosion rate is increased with increasing polarization potential, but the current loss decreases...
The kinetics of anode dissolution of nickel in molten sodium borosilicate and calcium aluminosilicat...
International audienceAnodic oxidation of copper, nickel and two copper-nickel alloys was studied in...
Nickel ferrite based cermets were examined as possible materials for inert, oxygen evolving anodes i...
The chemical composition and the lectrochemical properties of the oxide layer formed on a nickel ano...
In fluoride media, a passive layer of nickel fluoride is easily formed on nickel surfaces during ano...
The corrosion behaviour of nickel and monel in aqueous fluoride solutions was studied by potentiosta...
The corrosion behaviour of nickel and monel in aqueous fluoride solutions was studied by potentiosta...
The electrolytic formation of NF, from molten salt, NH,F-HF, KF-NH4F-HF, and CsF-NH,F-HF, with diffe...
A study of the anodic oxidation of nickel-based alloys in molten NaOH is presented, investigating th...
A study of the anodic oxidation of nickel-based alloys in molten NaOH is presented, investigating th...
The electrodeposition of nickel from acid fluoride solutions has been studied. The decomposition, di...
Fluorine gas has a wide range of industrial applications. In particular, the nuclear industry uses a...
Molten fluorides are appealing coolants for innovative nuclear systems but structural alloys may und...
The dissolution f lithiated nickel oxide cathodes results in a transport of nickel into the fuel cel...
The effect of Cd2+ on the electrodeposition of nickel from a sulphate bath in the absence and presen...
The kinetics of anode dissolution of nickel in molten sodium borosilicate and calcium aluminosilicat...
International audienceAnodic oxidation of copper, nickel and two copper-nickel alloys was studied in...
Nickel ferrite based cermets were examined as possible materials for inert, oxygen evolving anodes i...
The chemical composition and the lectrochemical properties of the oxide layer formed on a nickel ano...
In fluoride media, a passive layer of nickel fluoride is easily formed on nickel surfaces during ano...
The corrosion behaviour of nickel and monel in aqueous fluoride solutions was studied by potentiosta...
The corrosion behaviour of nickel and monel in aqueous fluoride solutions was studied by potentiosta...
The electrolytic formation of NF, from molten salt, NH,F-HF, KF-NH4F-HF, and CsF-NH,F-HF, with diffe...
A study of the anodic oxidation of nickel-based alloys in molten NaOH is presented, investigating th...
A study of the anodic oxidation of nickel-based alloys in molten NaOH is presented, investigating th...
The electrodeposition of nickel from acid fluoride solutions has been studied. The decomposition, di...
Fluorine gas has a wide range of industrial applications. In particular, the nuclear industry uses a...
Molten fluorides are appealing coolants for innovative nuclear systems but structural alloys may und...
The dissolution f lithiated nickel oxide cathodes results in a transport of nickel into the fuel cel...
The effect of Cd2+ on the electrodeposition of nickel from a sulphate bath in the absence and presen...
The kinetics of anode dissolution of nickel in molten sodium borosilicate and calcium aluminosilicat...
International audienceAnodic oxidation of copper, nickel and two copper-nickel alloys was studied in...
Nickel ferrite based cermets were examined as possible materials for inert, oxygen evolving anodes i...