Optimisation of a High-Resolution, Low-Latency Stripline Beam Position Monitor System for Use in Intra-Train Feedback

A high-resolution, low-latency beam position monitor (BPM) system has been developed for use in feedback systems at particle accelerators and beamlines that operate with trains of particle bunches with bunch separations as low as several tens of nanoseconds, such as future linear electron-positron colliders and free-electron lasers. The system was tested with electron beams in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization (KEK) in Japan. The fast analogue front-end signal processor is based on a single-stage RF down-mixer, with a measured latency of 15.6 ± 0.1 ns. The processor has been optimised, doubling the maximum operating beam intensity up to 1.6 nC, and the signal processing in the custom digital acquisition board has been upgraded in order to improve the resolution beyond the 300 nm level measured previously. The latest results, demonstrating a position resolution of order 150 nm with single-pass beam, will be presented