Add to ORKG51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 EFFECT OF SINTERING TIME ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF (Ti,Ta)(C,N)-BASED CERMETS
10.1016/j.ijrmhm.2011.03.002International Journal of Refractory Metals and Hard Materials295561-565I...
Promoting favorable wettability between the ceramic hard phase and the metal binder phase is crucial...
NbC-xTi(C0.7N0.3)-10Ni-7.5VC (vol%) based cermets with 0, 5, 10, 15 or 25 vol% Ti(C0.7N0.3) were pre...
Several (Ti,Ta)(C,N) cermets were prepared from Ti(C,N) and Ta powder with or without Ni. For compar...
Titanium carbonitride-based cermets are important materials for contemporary cutting tools. Ceramic ...
Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal com...
Ti(C,N) and TaC powders were mechanically alloyed and FAST/SPS sintered to produce dense (Ti,Ta)(C,N...
The microstructure of several TiC-TiN-Mo<sub>2</sub>C-WC-Co/Ni model alloys and a commercial (Ti,Ta,...
The microstructure of several TiC-TiN-Mo2C-WC-Co/Ni model alloys and a commercial (Ti,Ta,W,Mo)(C,N)-...
Titanium-tantalum carbonitride, (Ti, Ta)(C, N), based cermets with different Ti and Ta contents were...
The work presented in this thesis is concerned with the microstructure of Ti(C, N) based cermet mate...
Microstructure and mechanical characterization of (Ti,Ta)(C,N)-Co based solid solution cermets prepa...
AbstractMicrostructure and mechanical characterization of (Ti,Ta)(C,N)-Co based solid solution cerme...
Cermets with a nominal composition (Ti 0.8Ta 0.2C 0.5N 0.5- 20 wt.% Co) were synthesised by a mechan...
Different types of compaction process were employed in studying the effect of the green state on the...
10.1016/j.ijrmhm.2011.03.002International Journal of Refractory Metals and Hard Materials295561-565I...
Promoting favorable wettability between the ceramic hard phase and the metal binder phase is crucial...
NbC-xTi(C0.7N0.3)-10Ni-7.5VC (vol%) based cermets with 0, 5, 10, 15 or 25 vol% Ti(C0.7N0.3) were pre...
Several (Ti,Ta)(C,N) cermets were prepared from Ti(C,N) and Ta powder with or without Ni. For compar...
Titanium carbonitride-based cermets are important materials for contemporary cutting tools. Ceramic ...
Complete solid-solution cermets based on titanium-tantalum carbonitride using a starting nominal com...
Ti(C,N) and TaC powders were mechanically alloyed and FAST/SPS sintered to produce dense (Ti,Ta)(C,N...
The microstructure of several TiC-TiN-Mo<sub>2</sub>C-WC-Co/Ni model alloys and a commercial (Ti,Ta,...
The microstructure of several TiC-TiN-Mo2C-WC-Co/Ni model alloys and a commercial (Ti,Ta,W,Mo)(C,N)-...
Titanium-tantalum carbonitride, (Ti, Ta)(C, N), based cermets with different Ti and Ta contents were...
The work presented in this thesis is concerned with the microstructure of Ti(C, N) based cermet mate...
Microstructure and mechanical characterization of (Ti,Ta)(C,N)-Co based solid solution cermets prepa...
AbstractMicrostructure and mechanical characterization of (Ti,Ta)(C,N)-Co based solid solution cerme...
Cermets with a nominal composition (Ti 0.8Ta 0.2C 0.5N 0.5- 20 wt.% Co) were synthesised by a mechan...
Different types of compaction process were employed in studying the effect of the green state on the...
10.1016/j.ijrmhm.2011.03.002International Journal of Refractory Metals and Hard Materials295561-565I...
Promoting favorable wettability between the ceramic hard phase and the metal binder phase is crucial...
NbC-xTi(C0.7N0.3)-10Ni-7.5VC (vol%) based cermets with 0, 5, 10, 15 or 25 vol% Ti(C0.7N0.3) were pre...