Precipitation behavior of metastable phases in an Al-1.94 at%Cu alloy during isothermal aging at 373K was investigated by means of Vickers microhardness tests, DSC measurements and TEM observations. The size distribution of the precipitates was quantitatively investigated based on the TEM, HRTEM and HAADF-STEM images, and statistical parameters that fit the precipitate size distribution were determined under a log-normal distribution approximation. We have successfully estimated the volume fraction of copper in precipitates, and found that the G.P.(II) formation results in increases of volume fraction of metastable particles, mean size and hardness. [doi:10.2320/matertrans.47.3001
Postprint version of published article released under a CC-BY-NC-ND licenseThis work presents a deta...
In the present study, the effect of varying amounts of copper (Cu) addition on the kinetics of the p...
Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-al...
Precipitation behavior of metastable phases in an Al-1.94 at% Cu alloy during isothermal aging at 37...
The precipitation behavior in an Al-Cu alloy isothermally annealed at 463 K was studied using Vicker...
The precipitation process of an Al-Cu alloy was investigated using Vickers micro-hardness tests, DSC...
This sample has been aged after quenching to enable the growth of precipitates from a supersaturated...
An Al-Cu based alloy was subjected to ageing at 210°C and 240°C for varying duration of time between...
cited By 0International audiencePrecipitation hardening remains an important and efficient way to im...
An Al-Cu based alloy was subjected to ageing at 210°C and 240°C for varying duration of time between...
The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on p...
A new phase (designated 0) which precipitates in Al-Cu-Mg-Ag alloys having high Cu:Mg ratios, is kno...
The dispersoid precipitation behavior during the solutionizing and aging of Al-xwt.%Cu-1.0 wt.% Mn a...
Age-hardenable aluminum alloys are widely used in the automotive industry. These alloys are classifi...
The volume fraction of age hardening precipitates upon peak ageing after different quenching rates h...
Postprint version of published article released under a CC-BY-NC-ND licenseThis work presents a deta...
In the present study, the effect of varying amounts of copper (Cu) addition on the kinetics of the p...
Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-al...
Precipitation behavior of metastable phases in an Al-1.94 at% Cu alloy during isothermal aging at 37...
The precipitation behavior in an Al-Cu alloy isothermally annealed at 463 K was studied using Vicker...
The precipitation process of an Al-Cu alloy was investigated using Vickers micro-hardness tests, DSC...
This sample has been aged after quenching to enable the growth of precipitates from a supersaturated...
An Al-Cu based alloy was subjected to ageing at 210°C and 240°C for varying duration of time between...
cited By 0International audiencePrecipitation hardening remains an important and efficient way to im...
An Al-Cu based alloy was subjected to ageing at 210°C and 240°C for varying duration of time between...
The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on p...
A new phase (designated 0) which precipitates in Al-Cu-Mg-Ag alloys having high Cu:Mg ratios, is kno...
The dispersoid precipitation behavior during the solutionizing and aging of Al-xwt.%Cu-1.0 wt.% Mn a...
Age-hardenable aluminum alloys are widely used in the automotive industry. These alloys are classifi...
The volume fraction of age hardening precipitates upon peak ageing after different quenching rates h...
Postprint version of published article released under a CC-BY-NC-ND licenseThis work presents a deta...
In the present study, the effect of varying amounts of copper (Cu) addition on the kinetics of the p...
Experimental and phase field studies of age hardening response of a high purity Al-4Cu-1Li-0.25Mn-al...