A. Jafari Dastanaie, et al. Use of horizontal flow roughing filtration in drinking water treatment

ABSTRACT: In order to evaluate the feasibility of implementation of horizontal-flow roughing filtration for drinking water treatment a pilot was designed and run at the bank of Zayandehroud river near the village of Chamkhalifeh. Pilot running was performed in summer 2003 (July, August and September), when the quality of river water was in relatively worst condition. The filter is comprised from three different parts which are separated with perforated baffles. Each compartment is filled with some local sand and gravel considering a special decreasing size regime. The overall function of the filter in removing turbidity and total suspended solids is acceptable. Additionally, iron, manganese and color and coliform removal are also been covered to some extent. Achieved results in this study shows that horizontal-flow roughing filtration may be considered as a packed, low-cost and efficient pretreatment process incase surface water is used as water supply for treatment. Furthermore, when small scale societies are considered and when no major pollutants exist in the water supply as the case in this study _ this system may be posed as a total treatment system, in which treated water exited from the filter may be sent to distribution network after a simple post chlorination