Add to ORKGJR curve of toughened nylon 6/6 at high loading rates is determined by means of the load separation criterion. The results are compared with those measured using the multi-specimen testing procedures proposed by ESIS Technica
International audienceThe sensitivity of the flow stress of polymers to strain-rate is one of the ma...
Fracture toughness of ductile polymers can be measured by the incremental crack growth resistance cu...
An improved characterization of ductile material behaviour by J-R curves and by derived fracture tou...
The load separation criterion, which assumes that during the fracture process of a cracked body the ...
International audienceRound robin tests carried out under the direction of the Technical Committee 4...
The most used approach for determining the fracture resistance of ductile polymers at low loading ra...
In this work, the applicability of a procedure based on the load separation criterion in determining...
In the present work the J-integral approach has been adopted to evaluate the high-rate fracture resi...
Round robin tests carried out under the direction of the Technical Committee 4 of the European Struc...
The load separation principle states thal the load, P, can be represented as the multiplication of t...
Abstract The objective of this paper is to investigate the applicability of a very simple new method...
With a standard J-integral test technique and procedure still under development by the ASTM, various...
Research at Sandia National Laboratories has shown a strain rate dependence of many materials used i...
The Technical Committee 4, "Polymers, Polymer Composites and Adhesives", of the European Structural ...
There is an unbalanced dimension problem in the existing load separation theory. According to the si...
International audienceThe sensitivity of the flow stress of polymers to strain-rate is one of the ma...
Fracture toughness of ductile polymers can be measured by the incremental crack growth resistance cu...
An improved characterization of ductile material behaviour by J-R curves and by derived fracture tou...
The load separation criterion, which assumes that during the fracture process of a cracked body the ...
International audienceRound robin tests carried out under the direction of the Technical Committee 4...
The most used approach for determining the fracture resistance of ductile polymers at low loading ra...
In this work, the applicability of a procedure based on the load separation criterion in determining...
In the present work the J-integral approach has been adopted to evaluate the high-rate fracture resi...
Round robin tests carried out under the direction of the Technical Committee 4 of the European Struc...
The load separation principle states thal the load, P, can be represented as the multiplication of t...
Abstract The objective of this paper is to investigate the applicability of a very simple new method...
With a standard J-integral test technique and procedure still under development by the ASTM, various...
Research at Sandia National Laboratories has shown a strain rate dependence of many materials used i...
The Technical Committee 4, "Polymers, Polymer Composites and Adhesives", of the European Structural ...
There is an unbalanced dimension problem in the existing load separation theory. According to the si...
International audienceThe sensitivity of the flow stress of polymers to strain-rate is one of the ma...
Fracture toughness of ductile polymers can be measured by the incremental crack growth resistance cu...
An improved characterization of ductile material behaviour by J-R curves and by derived fracture tou...