Add to ORKGAbstract. With the traditional casting Penetration technology, high chromium cast iron composite layer has been formed on the surface of low carbon steel. The microstructure and Properties of cast Penetrating layer has been also studied. The test result has shown that the average microhardness of cast penetrating layer has been about 700HV and the hardness from composite layer to matrix changes smoothly. Among the three kinds of samples with different composition, the impact wear property of the sample with 40 % chromium has been the best and its wear resistance has been 3.26 times of ZG230-450
Results of investigations of wear resistant of two species of cast steel were introduced in the arti...
A cast iron/low carbon steel sandwich-structured bimetal fabricated through composite casting, follo...
The paper presents a detailed description of the process of creation of a surface alloy layer (using...
To obtain a compatible material with good wear resistance (WR) and toughness, a composite material w...
Two-liquid bimetal composite casting through the liquid film bond technology can realize large metal...
In order to improve wear resistance of cast steel, hard alloy powder layer was inserted bymolten cas...
Microstructure of chromium carbide reinforced Ni 3Al-based matrix composite coating prepared by argo...
The objective of this study is to investigate the correlation of microstructure with wear resistance...
In order to increase wear resistance cast steel casting the TiC-Fe-Cr type composite zones were fabr...
<p><em>Influence of ways of casting and influence of geometrical parameters of details made from chr...
The paper analyses the as-cast state structure of chromium cast iron designed for operation under ha...
The resistance of cast iron to abrasive wear depends on the metal abrasive hardness ratio. For examp...
To further improve the hardness of the laser cladding layer on the surface of the vermicular graphit...
Wear resistance of TiC-cast steel metal matrix composite has been investigated. Composites were obta...
A low carbon steel (LCS)/high chromium white cast iron (HCCI) bimetal wear plate about 20 mm in thic...
Results of investigations of wear resistant of two species of cast steel were introduced in the arti...
A cast iron/low carbon steel sandwich-structured bimetal fabricated through composite casting, follo...
The paper presents a detailed description of the process of creation of a surface alloy layer (using...
To obtain a compatible material with good wear resistance (WR) and toughness, a composite material w...
Two-liquid bimetal composite casting through the liquid film bond technology can realize large metal...
In order to improve wear resistance of cast steel, hard alloy powder layer was inserted bymolten cas...
Microstructure of chromium carbide reinforced Ni 3Al-based matrix composite coating prepared by argo...
The objective of this study is to investigate the correlation of microstructure with wear resistance...
In order to increase wear resistance cast steel casting the TiC-Fe-Cr type composite zones were fabr...
<p><em>Influence of ways of casting and influence of geometrical parameters of details made from chr...
The paper analyses the as-cast state structure of chromium cast iron designed for operation under ha...
The resistance of cast iron to abrasive wear depends on the metal abrasive hardness ratio. For examp...
To further improve the hardness of the laser cladding layer on the surface of the vermicular graphit...
Wear resistance of TiC-cast steel metal matrix composite has been investigated. Composites were obta...
A low carbon steel (LCS)/high chromium white cast iron (HCCI) bimetal wear plate about 20 mm in thic...
Results of investigations of wear resistant of two species of cast steel were introduced in the arti...
A cast iron/low carbon steel sandwich-structured bimetal fabricated through composite casting, follo...
The paper presents a detailed description of the process of creation of a surface alloy layer (using...