ABSTRACT: A binary latex system is described which meets several target criteria as a pressure sensitive adhesive on untreated polyester: improved humidity resistance (approx. 50 % peel retention after seven days in a high humidity environment), good film clarity before and after humidity aging, no transfer failure mode and good cohe-sive strength. A comparison is made to commercial acrylic latex material either fully formulated or as a binary system employing a new latex component as well. Superior performance is found with the new binary system in most performance areas
An adhesive is any substance that, when applied to the surfaces of materials, binds the surfaces tog...
This work presents a novel aqueous dispersion prepared from a solvent-borne acrylic copolymer mixtur...
Abstract: Several dual-curable acrylic pressure-sensitive adhesives (PSA) were synthesized by the ra...
The main topic of the thesis was to examine the hydrophobicity of labeling adhesives in the state be...
One of the time-tested challenges for waterborne latex pressure sensitive adhesives (PSAs) is to mat...
Pressure-sensitive adhesives (PSA) present an interesting class of products that offers a potential ...
Water-base pressure sensitive adhesives dominate the market of adhesives applied to paper. These mat...
A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition ...
A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition ...
The behavior of different polymerizable surfactants was investigated in order to improve the water r...
A series of pressure-sensitive adhesives (PSA) were prepared by emulsion polymerization in order to ...
Emulsion copolymers based on acrylic and vinylic comonomers were prepared by two-stage seeded emulsi...
A group of pressure-sensitive adhesives were prepared with constant glass transition temperature, us...
303 p.Nowadays, solvent-borne coatings and pressure-sensitive adhesives (PSAs) are still widely used...
Abstract: It has been previously shown that copolymers synthesized from n-butyl acrylate and unsatur...
An adhesive is any substance that, when applied to the surfaces of materials, binds the surfaces tog...
This work presents a novel aqueous dispersion prepared from a solvent-borne acrylic copolymer mixtur...
Abstract: Several dual-curable acrylic pressure-sensitive adhesives (PSA) were synthesized by the ra...
The main topic of the thesis was to examine the hydrophobicity of labeling adhesives in the state be...
One of the time-tested challenges for waterborne latex pressure sensitive adhesives (PSAs) is to mat...
Pressure-sensitive adhesives (PSA) present an interesting class of products that offers a potential ...
Water-base pressure sensitive adhesives dominate the market of adhesives applied to paper. These mat...
A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition ...
A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition ...
The behavior of different polymerizable surfactants was investigated in order to improve the water r...
A series of pressure-sensitive adhesives (PSA) were prepared by emulsion polymerization in order to ...
Emulsion copolymers based on acrylic and vinylic comonomers were prepared by two-stage seeded emulsi...
A group of pressure-sensitive adhesives were prepared with constant glass transition temperature, us...
303 p.Nowadays, solvent-borne coatings and pressure-sensitive adhesives (PSAs) are still widely used...
Abstract: It has been previously shown that copolymers synthesized from n-butyl acrylate and unsatur...
An adhesive is any substance that, when applied to the surfaces of materials, binds the surfaces tog...
This work presents a novel aqueous dispersion prepared from a solvent-borne acrylic copolymer mixtur...
Abstract: Several dual-curable acrylic pressure-sensitive adhesives (PSA) were synthesized by the ra...