Add to ORKGABSTRACT: A method based on micro attenuated total reflection (ATR) Fourier transform infrared spectroscopy (FTIR) is described to quantify inhomogeneity of plastic components in carbon fiber reinforced plastic material (CFRP). The investi-gated CFRPs contain an epoxy resin and a thermoplastic. Measurements on ground specimens at an inclined plane through the material allow the determination of the polymer distribution with a resolution of one micron regarding the depth. Three commercially available CFRPs (M18-1/G939, 8552/IM7, RTM 6) are characterized providing information on mechanical and thermal properties. KEY WORDS: CFRP, polymers, ATR-FTIR spectroscopy
The principles of the ATR technique for FTIR-spectroscopy are shown. The application for the analysi...
FTIR spectrometry (Fourier Transform Infrared) is an instrumental technique of analysis that present...
ABSTRACT Carbon fibers have been widely used as structural reinforcement in aeronautical composites,...
FTIR spectroscopy was used for the chemical characterization of CFRP composites. </p
Photo-acoustic (PA) detection is a non-destructive, non-disruptive mode of sample analysis. The prin...
Introduction: Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy with a...
Mechanical properties of (woven carbon fiber / vinyl ester matrix) composites can be greatly improve...
The application of specular reflectance FTIR spectroscopy for the investigation of carbon fiber rein...
A nondestructive method of evaluating the curing degree (crosslinking density) of cured rubbers and ...
Abstract — Recent developments in FT—IR sampling techniques such as diffuse reflectance and photoaco...
The fiber content φφ of fiber-reinforced plastics (FRPs) is a dominant influence on the mechanical p...
<div><p>Abstract When using Fourier transform infrared spectroscopy (FT-IR) under the qualitative a...
The subsurface structure of many technically applied materials is characterised by alterations of th...
This paper demonstrates the application of Fourier transform infrared (FTIR) imaging to the non-dest...
Three different methods of obtaining the infrared spectrum of carbon-epoxy prepreg for quality contr...
The principles of the ATR technique for FTIR-spectroscopy are shown. The application for the analysi...
FTIR spectrometry (Fourier Transform Infrared) is an instrumental technique of analysis that present...
ABSTRACT Carbon fibers have been widely used as structural reinforcement in aeronautical composites,...
FTIR spectroscopy was used for the chemical characterization of CFRP composites. </p
Photo-acoustic (PA) detection is a non-destructive, non-disruptive mode of sample analysis. The prin...
Introduction: Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy with a...
Mechanical properties of (woven carbon fiber / vinyl ester matrix) composites can be greatly improve...
The application of specular reflectance FTIR spectroscopy for the investigation of carbon fiber rein...
A nondestructive method of evaluating the curing degree (crosslinking density) of cured rubbers and ...
Abstract — Recent developments in FT—IR sampling techniques such as diffuse reflectance and photoaco...
The fiber content φφ of fiber-reinforced plastics (FRPs) is a dominant influence on the mechanical p...
<div><p>Abstract When using Fourier transform infrared spectroscopy (FT-IR) under the qualitative a...
The subsurface structure of many technically applied materials is characterised by alterations of th...
This paper demonstrates the application of Fourier transform infrared (FTIR) imaging to the non-dest...
Three different methods of obtaining the infrared spectrum of carbon-epoxy prepreg for quality contr...
The principles of the ATR technique for FTIR-spectroscopy are shown. The application for the analysi...
FTIR spectrometry (Fourier Transform Infrared) is an instrumental technique of analysis that present...
ABSTRACT Carbon fibers have been widely used as structural reinforcement in aeronautical composites,...