Behaviour of intrinsic polymer optical fibre sensor for large-strain applications

This paper derives the phase response of a single-mode polymer optical fibre for large-strain applications. The role of the finite deformation of the optical fibre and nonlinear strain optic effects are derived using a second order strain assumption and shown to be important at strain magnitudes as small as 1%. In addition, the role of the core radius change on the propagation constant is derived, but it is shown to be negligible as compared to the previous effects. It is shown that four mechanical and six opto-mechanical parameters must be calibrated to apply the sensor under arbitrary axial and transverse loading. The mechanical nonlinearity of a typical single-mode polymer optical fibre is experimentally measured in axial tension and is shown to be more significant than that of their silica counterpart. The mechanical parameters of the single-mode polymer optical fibre are also measured for a variety of strain rates, from which it is demonstrated that the strain rate has a strong influence on yield stress and strain. The calibrated constants themselves are less affected by strain rate