Add to ORKGMeasurements of flame length, flame heat transfer and flame spread are made on one-dimensional horizontal ceiling confined with two water-cooled soffits parallel to the flow field. Correlations with heat release rate are derived for flame length and flame heat transfer. Sensitivity to external heating and pilot flame intensity is studied on flame spread. Applicability of linearized flame spread theory for ceiling fires is examined using the test data. Key Words: ceiling fire, flame spread, flame length, heat transfer
[[abstract]]Previous work has demonstrated that flame height is one of the two most important parame...
The phenomenon of flame spread is neither fully understood nor accurately modeled. The purpose of th...
A detailed experimental investigation of wall fires in a channel was conducted to study the heat flu...
The rate of heat transfer to a specimen in The Fire Propagation Test has been measured. It rises as ...
This thesis presents an experimental investigation of the axisymmetric heat transfer from a small s...
Spill and ignition of flammable fuel can occur. The following fire can be free burning or affected b...
An experimental study of the heat transfer to a ceiling surface exposed by natural gas flames in the...
An opening in a fully developed burning room is the main path of a fire spreading from floor to floo...
ABSTRACT: Two sets of experimental data on flame length under flat ceilings from a burner in a lower...
Model-scale experiments were conducted on fire spread where the fire sources are placed in an open a...
This report describes methods of predicting heat flux exposure to external walls due to the impingem...
Experiments have been conducted to study the effects of forced gas flow velocity and oxygen concentr...
This work is an experimental study of the heat transfer to and the ignition of a ceiling surface exp...
This study experimentally investigates the radiation heat flux distribution received on the floor du...
It is proposed that concurrent-flow flame spread over solid fuel beds will be steady under condition...
[[abstract]]Previous work has demonstrated that flame height is one of the two most important parame...
The phenomenon of flame spread is neither fully understood nor accurately modeled. The purpose of th...
A detailed experimental investigation of wall fires in a channel was conducted to study the heat flu...
The rate of heat transfer to a specimen in The Fire Propagation Test has been measured. It rises as ...
This thesis presents an experimental investigation of the axisymmetric heat transfer from a small s...
Spill and ignition of flammable fuel can occur. The following fire can be free burning or affected b...
An experimental study of the heat transfer to a ceiling surface exposed by natural gas flames in the...
An opening in a fully developed burning room is the main path of a fire spreading from floor to floo...
ABSTRACT: Two sets of experimental data on flame length under flat ceilings from a burner in a lower...
Model-scale experiments were conducted on fire spread where the fire sources are placed in an open a...
This report describes methods of predicting heat flux exposure to external walls due to the impingem...
Experiments have been conducted to study the effects of forced gas flow velocity and oxygen concentr...
This work is an experimental study of the heat transfer to and the ignition of a ceiling surface exp...
This study experimentally investigates the radiation heat flux distribution received on the floor du...
It is proposed that concurrent-flow flame spread over solid fuel beds will be steady under condition...
[[abstract]]Previous work has demonstrated that flame height is one of the two most important parame...
The phenomenon of flame spread is neither fully understood nor accurately modeled. The purpose of th...
A detailed experimental investigation of wall fires in a channel was conducted to study the heat flu...