The development of temperature elds and powder ow during laser direct metal deposition wall growth

Abstract: The additive manufacturing technique of laser direct metal deposition (DMD) has had an impact in rapid prototyping, tooling and small-volume manufacturing applications. Components are built from metallic materials that are deposited by the continuous injection of powder into a moving melt pool, created by a defocused laser beam. The size of the melt pool, the temperature distributions around it and the powder ux are critical in determining process characteristics such as deposition rate. In this paper, the effects that changes in the distance between the laser deposition head and the melt pool have on these factors as a part is built using a coaxial powder feeding system are considered via a two-part analytical model. A heat ow model considers three-dimensional temperature distributions due to a moving Gaussian heat source in a nite volume and a simple mass-ow model considers changes in powder concentration with distance from the deposition head. The model demonstrates the effect of adjusting the melt pool standoff in different ways on melt pool and powder ow characteristics as a DMD structure is built, and hence allows the effect on build rate to be predicted. Its validity is veried by comparison with a series of 316L stainless steel walls, built using different standoff adjustment methods. The model is found to be able to explain the dimensional characteristics found