Abstract: The aim of this study to investigate polarization characteristics of WC-based alloy coatings fabricated by high velocity oxygen fuel(HVOF) process. The coatings were fabricated by HVOF process with WC-CrC-Ni, WC-Co-Cr, WC-Co composite powders. Corrosion tests were carried out using potentiostat/galvanostat at solution with pH 2 and pH 6. Corrosion potential(Ecorr) and corrosion current density(Icorr) could be analyzed from polarization curve. WC-Co-Cr coating showed more incorrodible characteristics than other coatings at solution pH 2. WC-CrC-Ni coating was more favorable anti-corrosio
The corrosion behavior of two wrought Co-Cr-W superalloys is studied under both polarization immersi...
Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was eval...
In the present work, the electrochemical behavior of WC-CoCr coatings with 10 (W10), 15 (W15) and 20...
HVOF thermal sprayed WC cermet coatings exhibit excellent abrasive and erosive wear resistance due t...
Several kinds of WC-reinforced coatings were prepared by high-velocity oxygen-fuel spray (HVOF) and ...
The paper presents results of the research focused on the characterization of two types of coatings ...
There is an urgent need to improve the corrosion resistance of WC-based cermet coatings in different...
The corrosion protection afforded to a carbon steel substrate by two cermet coatings (WC/12 wt.% Co ...
The paper is focused on investigating the quality of two grades of thermally sprayed coatings deposi...
Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance...
The wear and corrosion properties of the cyclone separator play a crucial role for the preparation o...
The purpose of coating is to get a blend of unique properties at low cost which is not possible from...
WOS:000658862600008The coatings produced with high-velocity oxygen fuel spraying technology can grea...
Cermet coatings provide protection against aggressive operating environment of machine and device el...
This study compares the properties of WC-Ni coatings manufactured from fine powder particles using h...
The corrosion behavior of two wrought Co-Cr-W superalloys is studied under both polarization immersi...
Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was eval...
In the present work, the electrochemical behavior of WC-CoCr coatings with 10 (W10), 15 (W15) and 20...
HVOF thermal sprayed WC cermet coatings exhibit excellent abrasive and erosive wear resistance due t...
Several kinds of WC-reinforced coatings were prepared by high-velocity oxygen-fuel spray (HVOF) and ...
The paper presents results of the research focused on the characterization of two types of coatings ...
There is an urgent need to improve the corrosion resistance of WC-based cermet coatings in different...
The corrosion protection afforded to a carbon steel substrate by two cermet coatings (WC/12 wt.% Co ...
The paper is focused on investigating the quality of two grades of thermally sprayed coatings deposi...
Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance...
The wear and corrosion properties of the cyclone separator play a crucial role for the preparation o...
The purpose of coating is to get a blend of unique properties at low cost which is not possible from...
WOS:000658862600008The coatings produced with high-velocity oxygen fuel spraying technology can grea...
Cermet coatings provide protection against aggressive operating environment of machine and device el...
This study compares the properties of WC-Ni coatings manufactured from fine powder particles using h...
The corrosion behavior of two wrought Co-Cr-W superalloys is studied under both polarization immersi...
Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was eval...
In the present work, the electrochemical behavior of WC-CoCr coatings with 10 (W10), 15 (W15) and 20...