Add to ORKGA complex activated sludge model implemented in BioWin software has been implemented to assure its predictability and improve the effectiveness of biological wastewater treatment in the full-scale plant in Poland. The influence of temperature and sludge retention time (SRT) on the quality of the effluent was also studied. The calibration was successfully performed according to the Good Modelling Practice Unified (GMP) protocol. Five parameters at a steady state and ten under dynamic conditions were calibrated. It occurred that in the studied wastewater treatment plant SRT should be kept at the low level sufficient to sustain nitrification. 1
http://omicron.ch.tuiasi.ro/EEMJ/International audienceIn paper processes, the variability of efflue...
A methodology for calibration of the activated sludge plant models is proposed on the basis of conso...
The main objectives of the present thesis can be summarized as: i) the development and validation of...
This paper presents a method for calibration of activated sludge model with the use of computer prog...
The management of wastewater treatment plants to comply with new strict effluent criteria is a great...
448-458The effect of temperature on the phosphorous, nitrogen, and organic matter removal in an acti...
Mathematical models of activated sludge systems are useful tools for both design and operational opt...
Detailed knowledge on the composition of the influent going into the wastewater treatment system is ...
Computer modelling prOVides the tool to incorporate the large number of components and reactions to ...
A laboratory model nitrifying activated sludge plant treating OECD synthetic sewage was designed and...
During recent years there has been an increasing demand for better operation of wastewater treatment...
Temperature is an important factor affecting biomass activity, which is critical to maintain efficie...
In this study, the solid retention time (SRT) was varied with the ambient temperature for a full-sca...
Wastewater treatment plants (WWTPs) provide a barrier against the discharge of contaminants of emerg...
The research aim was to develop a mathematical model for predicting the behaviour of an activated sl...
http://omicron.ch.tuiasi.ro/EEMJ/International audienceIn paper processes, the variability of efflue...
A methodology for calibration of the activated sludge plant models is proposed on the basis of conso...
The main objectives of the present thesis can be summarized as: i) the development and validation of...
This paper presents a method for calibration of activated sludge model with the use of computer prog...
The management of wastewater treatment plants to comply with new strict effluent criteria is a great...
448-458The effect of temperature on the phosphorous, nitrogen, and organic matter removal in an acti...
Mathematical models of activated sludge systems are useful tools for both design and operational opt...
Detailed knowledge on the composition of the influent going into the wastewater treatment system is ...
Computer modelling prOVides the tool to incorporate the large number of components and reactions to ...
A laboratory model nitrifying activated sludge plant treating OECD synthetic sewage was designed and...
During recent years there has been an increasing demand for better operation of wastewater treatment...
Temperature is an important factor affecting biomass activity, which is critical to maintain efficie...
In this study, the solid retention time (SRT) was varied with the ambient temperature for a full-sca...
Wastewater treatment plants (WWTPs) provide a barrier against the discharge of contaminants of emerg...
The research aim was to develop a mathematical model for predicting the behaviour of an activated sl...
http://omicron.ch.tuiasi.ro/EEMJ/International audienceIn paper processes, the variability of efflue...
A methodology for calibration of the activated sludge plant models is proposed on the basis of conso...
The main objectives of the present thesis can be summarized as: i) the development and validation of...