Add to ORKGA method of gripping and reinforcing the ends of anisotropic tubes for testing under combined axial load and internal pressure is analysed. Edge solutions for long, cylindrical, specially orthotropic shells are considered. The tube, reinforcement, and grips are then modelled as an assembly of short, parallel, multilayered, thin-walled, Theoretical results are presented for the stress distribution in a f 75 degree filament-wound E glass/epoxy resin orthotropic shells. tube with circumferentially wound glass fibre reinforced ends.
Analytical solutions are obtained for axisymmetric elastic-plastic deformations in tightly fitted co...
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic...
Cylindrical tubes and membranes are universal structural elements found in biology and engineering o...
The nature of the extensional response of anisotropic cylinders, such as helical-wound composite tub...
To gain needed insight into the effects of thickness to diameter ratio (t/Di), length to diameter ra...
Fifty, 100 mm diameter f 75 degree filament wound E glass fibrelepoxy resin tubes have been tested t...
Pre-printThe displacement-based elastic solution for layered anisotropic tubes is extended to allow ...
The paper describes several algorithms based on the method of parameter continuation for thin-walled...
Tubular specimens were potted in metal grips to determine the feasibility of this gripping method in...
International audienceA complete analytical model combined with a very simple experimental procedure...
A finite element displacement method of analysis is presented for applications to laminated anisotro...
Abstract: This project involves an evaluation of behaviour of circular GFRP tubes under axial compre...
This thesis deals with the problem of plastic buckling and collapse of moderately thin-walled tubes ...
Three dimensional analysis of thick walled filament wound composite tube under internal pressure loa...
The yield surface for a shell of revolution which is loaded axisymmetrically and made of an anisotro...
Analytical solutions are obtained for axisymmetric elastic-plastic deformations in tightly fitted co...
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic...
Cylindrical tubes and membranes are universal structural elements found in biology and engineering o...
The nature of the extensional response of anisotropic cylinders, such as helical-wound composite tub...
To gain needed insight into the effects of thickness to diameter ratio (t/Di), length to diameter ra...
Fifty, 100 mm diameter f 75 degree filament wound E glass fibrelepoxy resin tubes have been tested t...
Pre-printThe displacement-based elastic solution for layered anisotropic tubes is extended to allow ...
The paper describes several algorithms based on the method of parameter continuation for thin-walled...
Tubular specimens were potted in metal grips to determine the feasibility of this gripping method in...
International audienceA complete analytical model combined with a very simple experimental procedure...
A finite element displacement method of analysis is presented for applications to laminated anisotro...
Abstract: This project involves an evaluation of behaviour of circular GFRP tubes under axial compre...
This thesis deals with the problem of plastic buckling and collapse of moderately thin-walled tubes ...
Three dimensional analysis of thick walled filament wound composite tube under internal pressure loa...
The yield surface for a shell of revolution which is loaded axisymmetrically and made of an anisotro...
Analytical solutions are obtained for axisymmetric elastic-plastic deformations in tightly fitted co...
An analysis of a thin toroidal shell of circular cross section, constructed form a plane anisotropic...
Cylindrical tubes and membranes are universal structural elements found in biology and engineering o...