FORENSIC INVESTIGATION FOR INSPECTING ELECTRICAL CONDUCTORS INVOLVED IN FIRES FOR ARC AND MELT BEADS

The objective of this research was to determine, experimentally, if distinguishing characteristics exist between the beads formed on energized and non-energized wires exposed to various thermal insults. Most of research published in the literature has not tested energized and non-energized wires under the same thermal conditions. The tests in this study were conducted using convective, radiative and combined convective/radiative thermal exposures. Wires were tested in both energized and non-energized states. Energized wires were tested under “load ” and “no load” conditions. Beads formed on both the energized and non-energized wires as results of thermal exposure. Beads were analyzed externally and internally with stereo microscope, SEM/EDS, and a metallurgical microscope. No clear trends or distinguishing visual or microscopic characteristics between the beads formed on energized and non-energized wires were found. The bead analysis methods used during this research showed that it is not possible to distinguish between the bead