In developing countries like India, use of petrol fuels like furnace oil or light diesel oil to meet the thermal energy demands of industries places a heavy burden on the economy. Use of producer gas from indigenously available agricultural residues is an attractive alternative. This paper reports the commercial scale (1080 MJ h-1) development of a low-density biomass gasification system for thermal applications. The gasifier can handle fuels like sugarcane leaves and bagasse, bajra stalks, sweet sorghum stalks and bagasse etc. The system was tested for more than 700 hours under laboratory conditions at 288-1080 MJ h-1 output levels. The HHV of the gas was 3.56-4.82 MJ Nm-3. The system also produces char, which is about 24 % by weight of th...
Replacement of petroleum by other energy sources is one of the principal challenges of contemporary ...
This paper presents both the fundamental and technological aspects of gasification of pulverisable a...
The paper addresses case studies of a low temperature and a high temperature industrial heat require...
In developing countries like India, use of petrol fuels like furnace oil or light diesel oil to meet...
The processing of sugarcane bagasse as a potential feedstock for efficient energy production has att...
Use of fuel other than woody generally has been limited to rice husk and other residues are rarely t...
This paper investigated the mass and energy balance of the gasification of sugarcane bagasse using c...
The worldwide harvest of sugarcane for sucrose production represents a major agricultural industry, ...
The complete gasification comprises all the processes, which convert the solid fuel into a gaseous a...
The insight that the fossil fuel reserves are limited, together with concerns over security of suppl...
National energy demand has been fulfilled by non-renewable energy sources, such as natural gas, petr...
ABSTRACT The paper addresses issues related to development of a biomass gasifier for thermal applica...
Sugarcane bagasse is the main byproduct of sugarcane mill, ready available at the production site so...
This paper addresses the design, performance and economic evaluation of biomass based open core down...
Back in 1970s and 1980s, cogeneration plants in sugarcane mills were primarily designed to consume a...
Replacement of petroleum by other energy sources is one of the principal challenges of contemporary ...
This paper presents both the fundamental and technological aspects of gasification of pulverisable a...
The paper addresses case studies of a low temperature and a high temperature industrial heat require...
In developing countries like India, use of petrol fuels like furnace oil or light diesel oil to meet...
The processing of sugarcane bagasse as a potential feedstock for efficient energy production has att...
Use of fuel other than woody generally has been limited to rice husk and other residues are rarely t...
This paper investigated the mass and energy balance of the gasification of sugarcane bagasse using c...
The worldwide harvest of sugarcane for sucrose production represents a major agricultural industry, ...
The complete gasification comprises all the processes, which convert the solid fuel into a gaseous a...
The insight that the fossil fuel reserves are limited, together with concerns over security of suppl...
National energy demand has been fulfilled by non-renewable energy sources, such as natural gas, petr...
ABSTRACT The paper addresses issues related to development of a biomass gasifier for thermal applica...
Sugarcane bagasse is the main byproduct of sugarcane mill, ready available at the production site so...
This paper addresses the design, performance and economic evaluation of biomass based open core down...
Back in 1970s and 1980s, cogeneration plants in sugarcane mills were primarily designed to consume a...
Replacement of petroleum by other energy sources is one of the principal challenges of contemporary ...
This paper presents both the fundamental and technological aspects of gasification of pulverisable a...
The paper addresses case studies of a low temperature and a high temperature industrial heat require...