Add to ORKGThe DAΦNE Accumulator is a 32.56 m machine, used as a damping and accumulation ring for electrons and, alternatively, positrons designed to make injection into the collider main rings easier and faster [1]. The lattice of the Accumulator consists of four quasi-achromatic arcs, each one with two 45
Obtaining very short bunches is an issue especially for colliders but also for CSR sources. The modu...
central orbit momentum, has 50n m circumference, Q-values around 2 1/4 and a large dispersion, up to...
Technical Note I-1[1], where a preliminary lattice for the accumulator is de-scribed, together with ...
A new working point above the integer in both planes has been chosen for the DAΦNE accumulator, with...
The injection system for DAΦNE, the Frascati Φ-factory project, must be designed as a very powerful ...
The prototype of the Accumulator sextupoles, built by TESLA Engineering (U.K.) has been delivered to...
In order to describe the accumulator lattice a model is generally used where the dipole is repre-sen...
This note is to describe a preliminary design of a section of the transport lines for the DAΦNE whic...
In small colliders and damping rings, such as DAΦNE 1) and its Accumulator 2,3), the bending dipoles...
DAΦNE is a double ring electron-positron collider, designed to provide very high luminosity at the e...
The DAΦNE Φ-Factory is an e+ e- high luminosity collider under construction at the INFN-LNF (1). At ...
To optimize injection efficiency it has been chosen to inject in DAΦNE a damped beam from an accumul...
The 2 ° injection/extraction septum is one of the most critical magnetic elements of both the DAΦNE ...
This note deals with the electromagnetic (e.m.) design of the accu-mulator RF cavity. We will discus...
The layout of the machine is shown in Fig. 1. The two rings cross in the horizontal plane in two poi...
Obtaining very short bunches is an issue especially for colliders but also for CSR sources. The modu...
central orbit momentum, has 50n m circumference, Q-values around 2 1/4 and a large dispersion, up to...
Technical Note I-1[1], where a preliminary lattice for the accumulator is de-scribed, together with ...
A new working point above the integer in both planes has been chosen for the DAΦNE accumulator, with...
The injection system for DAΦNE, the Frascati Φ-factory project, must be designed as a very powerful ...
The prototype of the Accumulator sextupoles, built by TESLA Engineering (U.K.) has been delivered to...
In order to describe the accumulator lattice a model is generally used where the dipole is repre-sen...
This note is to describe a preliminary design of a section of the transport lines for the DAΦNE whic...
In small colliders and damping rings, such as DAΦNE 1) and its Accumulator 2,3), the bending dipoles...
DAΦNE is a double ring electron-positron collider, designed to provide very high luminosity at the e...
The DAΦNE Φ-Factory is an e+ e- high luminosity collider under construction at the INFN-LNF (1). At ...
To optimize injection efficiency it has been chosen to inject in DAΦNE a damped beam from an accumul...
The 2 ° injection/extraction septum is one of the most critical magnetic elements of both the DAΦNE ...
This note deals with the electromagnetic (e.m.) design of the accu-mulator RF cavity. We will discus...
The layout of the machine is shown in Fig. 1. The two rings cross in the horizontal plane in two poi...
Obtaining very short bunches is an issue especially for colliders but also for CSR sources. The modu...
central orbit momentum, has 50n m circumference, Q-values around 2 1/4 and a large dispersion, up to...
Technical Note I-1[1], where a preliminary lattice for the accumulator is de-scribed, together with ...