Fourier transform infrared microscopy combined with a focal plane array detector was used to illustrate the distribution of cellulose and lignin in wood of European beech (Fagus sylvatica L.). Two independent methods were used for data analysis: (a) an integration; and (b) a correlation method. In method (a), the typical range of wave-numbers for cellulose (1390-1350 cm-1) or lignin (1530-1490 cm-1) was integrated in each spectrum and the distribution of the measured intensities was recorded. For the correlation method (b), reference Fourier transform infrared spectra for isolated beech lignin and cellulose were generated. The spectra obtained with the focal plane array detector in beech wood were correlated with reference spectra for cellu...
The aim of this investigation is to study the changes occurring on the surface of poplar wood expose...
Interactions between macromolecules in the cell walls of different plant origin were compared, namel...
Wood is sensitive to photochemical degradation. The development of a wood surface protected against ...
Fourier transform infrared (FTIR) imaging offers the opportunity to analyse the chemical composition...
Near infrared (NIR) spectroscopy offers an efficient method for the characterization of solid wood. ...
The mechanical and physical properties of wood fibres are dependent on the organisation of their con...
This study aimed to analyze chemical changes by Fourier Transform Infrared Spectroscopy of Eucalyptu...
AbstractSpruce wood that had been degraded by brown-rot fungi (Gloeophyllum trabeum or Poria placent...
The determinations of cellulose and lignin are important in wood analysis from both perspectives: ch...
The feasibility of Fourier transform infrared (FT-IR) microscopy to monitor in situ the enzymatic de...
AbstractIn order to investigate the chemical modifications of wood forming tissue from Pinus koraien...
The purpose of the study is to investigate the variation of the amount and polymer structure of lign...
The properties of wood can be improved after heat-treatment. There have been many studies dealing wi...
Leaning stems of woody plants form reaction wood, in hardwood trees termed tension wood. Tension woo...
Different chemical components and their location in strawberry achene, vascular bundles and cortical...
The aim of this investigation is to study the changes occurring on the surface of poplar wood expose...
Interactions between macromolecules in the cell walls of different plant origin were compared, namel...
Wood is sensitive to photochemical degradation. The development of a wood surface protected against ...
Fourier transform infrared (FTIR) imaging offers the opportunity to analyse the chemical composition...
Near infrared (NIR) spectroscopy offers an efficient method for the characterization of solid wood. ...
The mechanical and physical properties of wood fibres are dependent on the organisation of their con...
This study aimed to analyze chemical changes by Fourier Transform Infrared Spectroscopy of Eucalyptu...
AbstractSpruce wood that had been degraded by brown-rot fungi (Gloeophyllum trabeum or Poria placent...
The determinations of cellulose and lignin are important in wood analysis from both perspectives: ch...
The feasibility of Fourier transform infrared (FT-IR) microscopy to monitor in situ the enzymatic de...
AbstractIn order to investigate the chemical modifications of wood forming tissue from Pinus koraien...
The purpose of the study is to investigate the variation of the amount and polymer structure of lign...
The properties of wood can be improved after heat-treatment. There have been many studies dealing wi...
Leaning stems of woody plants form reaction wood, in hardwood trees termed tension wood. Tension woo...
Different chemical components and their location in strawberry achene, vascular bundles and cortical...
The aim of this investigation is to study the changes occurring on the surface of poplar wood expose...
Interactions between macromolecules in the cell walls of different plant origin were compared, namel...
Wood is sensitive to photochemical degradation. The development of a wood surface protected against ...