Lamination of green ceramic tapes is one of the most important technological processes in multilayer ceramic technology. Lamination affects the quality of all 3D structures (e.g., channels, chambers, membranes, etc.). Novel chemical methods of lamination reduce the deformation of 3D structures. However, these methods are useless in the fabrication of thin membranes and structures with thick-film electronic components or electric vias. Therefore, thermo-compressive lamination is still the best solution for the lamination of green ceramic tapes. Low-pressure thermo-compressive lamination with an insert material is presented in this paper. The influence of pressure and Low Temperture Cofired Ceramics (LTCC) material on the compressibility and ...
Various methods exist to improve the toughness and reduce the sensitivity to the defects in ceramic ...
Low Temperature Co-fired Ceramic (LTCC) Technology is recentlyaddressed to be a key approach among a...
International audienceThe shrinkage of Low Temperature Co-fired Ceramics (LTCC) during firing is one...
This paper deals with production of the structures fabricated using low temperature co-fired ceramic...
ABSTRACT The complex geometries required for new and novel ceramic parts require new fabrication met...
International audienceThe process of low temperature cofired ceramics fabrication includes a laminat...
Master’s thesis deals with the optimalization of low-temperature cofired ceramic lamination process ...
LTCC technology is based on sintering of multi-layered thick-film sheets (50-250µm) or so-called gre...
In this work, we investigate a new method of low-pressure lamination of low-temperature cofired cera...
This thesis deals with the development of fabrication techniques that make possible the use of Low T...
In laminated object manufacturing of ceramic components, lamination is one of the most important ma...
Smart packaging concept has been the driving force for the search of advanced technologies to produc...
The development of alumina green tapes, made of water based binder systems, allows the structuring b...
Tape casting and subsequent lamination of tapes into a high-density green body are two of the key st...
At the Fraunhofer Institute for Ceramic Technologies and Systems the principle of manufacturing of c...
Various methods exist to improve the toughness and reduce the sensitivity to the defects in ceramic ...
Low Temperature Co-fired Ceramic (LTCC) Technology is recentlyaddressed to be a key approach among a...
International audienceThe shrinkage of Low Temperature Co-fired Ceramics (LTCC) during firing is one...
This paper deals with production of the structures fabricated using low temperature co-fired ceramic...
ABSTRACT The complex geometries required for new and novel ceramic parts require new fabrication met...
International audienceThe process of low temperature cofired ceramics fabrication includes a laminat...
Master’s thesis deals with the optimalization of low-temperature cofired ceramic lamination process ...
LTCC technology is based on sintering of multi-layered thick-film sheets (50-250µm) or so-called gre...
In this work, we investigate a new method of low-pressure lamination of low-temperature cofired cera...
This thesis deals with the development of fabrication techniques that make possible the use of Low T...
In laminated object manufacturing of ceramic components, lamination is one of the most important ma...
Smart packaging concept has been the driving force for the search of advanced technologies to produc...
The development of alumina green tapes, made of water based binder systems, allows the structuring b...
Tape casting and subsequent lamination of tapes into a high-density green body are two of the key st...
At the Fraunhofer Institute for Ceramic Technologies and Systems the principle of manufacturing of c...
Various methods exist to improve the toughness and reduce the sensitivity to the defects in ceramic ...
Low Temperature Co-fired Ceramic (LTCC) Technology is recentlyaddressed to be a key approach among a...
International audienceThe shrinkage of Low Temperature Co-fired Ceramics (LTCC) during firing is one...