Efficient Energy Control Strategies for a Standalone Renewable/Fuel Cell Hybrid Power Source

Abstract: In this paper, four energy control strategies are proposed and analyzed for the Standalone Renewable / Fuel Cell Hybrid Power Source (RES/FC HPS). The concept of the Load Following (LF) and Maximum Efficiency Point Tracking (MEPT) is used to control the fueling rates. A standalone RES/FC HPS uses at least one Renewable Energy Sources (RES) and a Polymer Electrolyte Membrane (PEM) Fuel Cell (FC) as backup source. Photovoltaic (PV) array and wind turbines (WT) farm are used as RES and the surplus of energy during light load stages is stored in hydrogen tank via water electrolysis to fuel the PEMFC. Small-scale RESs and commercially available PEMFCs are interfaced to the common DC bus via power converters and then to the single-phase distribution grid through a voltage source inverter. RES/FC HPS seem to be an efficient alternative for supplying smart houses and isolated sites. This paper proposes a new supervision strategy of the Energy Management Unit (EMU) based on the LF control approach that assures a charge-sustaining (CS) mode for the Energy Storage System (ESS). So, the capacity of the batteries stack can be reduced at minimum if it is directly connected to the DC bus. The ultracapacitors stack compensates dynamically the power flow balance on the DC bus, regulating the DC voltage via a bidirectional buck-boost power converter. Thus, a semi-active hybrid topology is adopted for the ESS having the batteries stack. The MEPT loops ensure an optimized energy management of the RES/FC HPS. The LF strategy designed based on the power flow balance guarantees th