WIND ENERGY Wind Energ. 0000; 00:1–15 DOI: 10.1002/we RESEARCH ARTICLE

Individual wind turbines in a wind farm typically operate to maximize their performance with no consideration of the impact of wake effects on downstream turbines. There is potential to increase power and reduce structural loads within a wind farm by properly coordinating the turbines. To effectively design and analyze coordinated wind turbine controllers requires control-oriented turbine wake models of sufficient accuracy. This paper focuses on constructing such a model from experiments. The experiments were conducted to better understand the wake interaction and impact on voltage production in a three-turbine array. The upstream turbine operating condition was modulated in time and the dynamic impact on the downstream turbine was recorded through the voltage output time signal. The flow dynamics observed in the experiments were used to improve a static wake model often used in the literature for wind farm control. These experiments were done in the atmospheric boundary layer wind tunnel at the Saint Anthony Falls Laboratory (SAFL) at the University of Minnesota using particle image velocimetry (PIV) for flow field analysis and turbine voltage modulation to capture th